Search results

does the nozzle check change after 24h? If so it could be air bubbles in the inks supply or inside the printhead. On my p900 I had no problems up to now but on my former Epson printers waiting for several hours helped to get rid of air bubble problems and the nozzlecheck was fine again.

hehe, I think I agree with everything pharmacist said :weee. I bought a used p900 and compared the Farbenwerk Pigmera prints to the OEM inks which came with the printer and for me they are equal. Also zero problems with clogging since then. Before I had Inktec in a p800, also very good but the...

I got a LED video light panel with high CRI LED from Dracast, I hope that will do the job.

I was hoping for a ready to buy desktop lamp.

Hi all, can anybody recommend a desktop light source in order to judge prints made late at night ;-) May be a LED solution with light compared to D50 fluorescent lamps but without bee forced to sell a kidney. best regards Lothar

my GX6050 is gravity siphoned. After a year I had several times problems with air in the tubes, needing a deep flushing cycle. But I was lucky and Canon replaced it with a new printer.

up to A3 you get the Brilliant Supreme matte (230g, can be printed doublesided) from Calumet https://www.calumetphoto.de/product/brilliant-supreme-ink-jet-papier-din-a4-100-blatt-matte-doppelseitige-beschichtung-230g-m2/BRIBP0345 25,50€ for 100 sheets A4. In my Photclub we compared my prints...

very strange, today I can no longer get the third test target. I found no option in ccstudio (and i1Studio) for the third test target - only the 2x50 patches method like in the past. Any ideas?

Hello Nelson, can you please guide me to this option, where does this option appear? one hour later: I recognised you were speaking of ccStudio and I had i1Studio installed :he. So after installing ccStudio I made a profile printed on A6 with three test charts. I prefer to print A4->A6 over...

do you have to move the Colormunki much slower when using a smaller printed testchart? Can I also cut A4 sheets in two A5 and then in the printer choose A5 and enable "fit to size"? Edit: I just tried and cut a small cardboard template for moving the Colormunki on the A5 print, it just worked...

Sorry I was wrong. The Chip resetter has no exact guiding slot for the cartridges so I missed the exact pins on the cartridges. After a helpful mail contact with Farbenwerk I retried and voilà all carts are reset. This is very convenient because I normally refill all carts when one is empty and...

I just got the refillable Cartridges from Aliexpress and mounted the Chip from the original cartridges because they are transperant where you can see the ink level and they are easier to refill. I hoped, but I cannot reset a cartridge what has not shown the yellow empty signal, the old ink level...

just got the parcel from Farbenwerk. I refilled an original Epson cartridge according to their method by stitching a hole under the valve: http://files.farbenwerk.com/pdf/Befüllung-SCP900-SCP700-Original.pdf and reset the the chip with the resetter from Farbenwerk. Everything seems to work, now...

no I have no additional roll holder, I have this with my p800 but never used it:oops:

in the meantime I got the p900. One of the grey carts is very low so I cannot print very much with OEM material, but some first attemps on Epson prof. glossy paper are dissapointing using Epson profiles only with the max. print settings the strawberry got printed fine otherwise a tend towards...

Nobody? What do you experts think about the Black Enhance Overcoat-Technology? Can this be done with 3rd party ink sets or is there a secret in the Epson Pro-10 inks for this effect?

I also would like to upgrade from my p800 to the p900. I read lot about good results on glossy paper for the Epson Ultrachreme Pro-10 inks. Is there a source of 3rd party refill inks which give similar good results on glosyy paper like the Epson Pro-10 inks?

in the meantime I found a pack of A3 screen print film what works (Agfa Cop Jet). Printsetting I used were for Archival matte paper. If this works for Cyanotype I'll have to find A2 or roll material :):):)

but not in DINA2

Hi all, for Cyanotype exposures I want to print a negative on a transparency film which blocks the UV light while doing contact copys. I tried transparent drawing paper I used years ago for doing technical drawings with black ink. This paper does not absorb ink and with all settings I tried on...