- Joined
- Jan 4, 2012
- Messages
- 1,675
- Reaction score
- 1,309
- Points
- 277
- Location
- UK
- Printer Model
- Canon Pro9000 II
I raised this once before, but cannot remember in which thread, so have started a new one.
Through some unknown action I have acquired a delay and an additional screen display on shutdown.
The shutdown sequence originally went straight into Windows close down and was quite brief. Now there is a delay, then this screen is displayed briefly with no sign of any other program running. This screen then disappears and Windows starts closing as normal.
Examining the system in Task Master shows no "application" running, but about 130 "processes", which appears quite normal. Clicking "Cancel" achieves nothing, nor does "Force shut down", the screen is displayed very briefly, after the initial delay, but I have not found its source.
Any ideas?
Through some unknown action I have acquired a delay and an additional screen display on shutdown.
The shutdown sequence originally went straight into Windows close down and was quite brief. Now there is a delay, then this screen is displayed briefly with no sign of any other program running. This screen then disappears and Windows starts closing as normal.
Examining the system in Task Master shows no "application" running, but about 130 "processes", which appears quite normal. Clicking "Cancel" achieves nothing, nor does "Force shut down", the screen is displayed very briefly, after the initial delay, but I have not found its source.
Any ideas?