Search results

  1. juntjoo

    Can revive a Brother MFC-J615W cartridge by simply filling it?

    are you saying refilling is not simple or even possible?
  2. juntjoo

    Can revive a Brother MFC-J615W cartridge by simply filling it?

    I don't want to waste ink on if it will need chip resetting.
  3. juntjoo

    revive old cartridges from inside out with solution?

    It just occurred to me, and this is probably either an old or dumb idea with my record, that you could use isopropyl alcohol, or better solution to run through your cartridges just to clean them out like one of those supplement/salt flushes, from inside out. Then just run a bunch of test pages...
  4. juntjoo

    How to fix the black part of my Epson XP-340 printhead

    Do printers in general clean the printhead automatically periodically as long as you keep the power on?
  5. juntjoo

    How to fix the black part of my Epson XP-340 printhead

    I w I was asking a couple question more than making any points
  6. juntjoo

    How to fix the black part of my Epson XP-340 printhead

    Thanks . In another similar note, one got another XP, an XP-430 interestingly, seems like a step up from the 340. Takes the same ink. This one moves fluid freely through printhead, but zero print. This means it's dead right? And if course only China sells them for $70. Who's buying them?? If...
  7. juntjoo

    How to fix the black part of my Epson XP-340 printhead

    So you think it's the use of 3rd party inks that kill these units? That if I'd used oem instead this printhead would have sprung to life? Well I suppose that's possible.
  8. juntjoo

    How to fix the black part of my Epson XP-340 printhead

    3rd party. It's dead now. Second epson to just die after cleaning it out with this method. No power to the printer. I wouldn't waste money on new OEM inks to test on these sketchy printheads. Unless I'm wrong it seems these printhead separate from cartridge systems, especially the ones built...
  9. juntjoo

    How to fix the black part of my Epson XP-340 printhead

    This usually works and has already for CM&Y but not K. I've run a couple ounces at least of isopropyl alcohol through to some paper towel underneath and it's still not printing but showing full ink on a new cartridge. Sounds like the printhead dead no? Or do I just need to keep running it...
  10. juntjoo

    How to get printhead to move out into open MFC-240C

    I'm trying to get under it with paper towel to absorb cleaning solution I'll be pushing through the system. I found a suggestion for a similar model of holding the cancel button but that didnt work. Any ideas? I know printers move the printhead our of their seats but I don't know why and how to...
  11. juntjoo

    Workforce printers showing new ink cartridges depleted after little use

    Nah, it hasn't run that many cycles. I just put the cartridges in.
  12. juntjoo

    Workforce printers showing new ink cartridges depleted after little use

    Why according to my printers do these aftermarket cartridges deplete their ink so rapidly when I haven't even used them other than for a few test prints? I've got a WF-2630 and a WF-2760. The ones from the pic would be my second set, the first did the same thing, now two of them are useless...
  13. juntjoo

    Pushed alcohol through to old Epson WF-2630 printhead, then died

    It wasn't printing anything with new aftermarket cartridges so I pushed the alcohol through the top with a syringe and tube, took a day with rubber bands to hold pressure on the syringit was that clogged, installed cartridges, system went through "preparing the ink system" then screen went blank...
  14. juntjoo

    Is there a way to print with an epson printer when it wants a new cartridge?

    I'm guessing this pretty common with them, at least the xp series I've got a couple in front of me. As soon as one needs replacing it ceases to work until it gets a working cartridge.
  15. juntjoo

    Canon MG3022 takes paper only part way then quits

    Video What does it look like is happening or not here?
  16. juntjoo

    Do you guys have a method for resealing non-printhead cartridges?

    Not a bad idea. I may try aluminum tape first otherwise I've got a couple old tubes
  17. juntjoo

    Do you guys have a method for resealing non-printhead cartridges?

    Idk if they have a specific name, anyway, do you use a particular kind of tape? I'm imagining a good aluminum tape would work good for this purpose. How would you seal these if weren't planning on using them for a while?
  18. juntjoo

    Canon MP470 with error: 5100 and good cartridges

    Thanks for looking into. I did too and caught that possible solution but it didn't work. Mind you I didn't really get at it as it's deep in there. I'll try again later and maybe see if it's easy enough to open it up....
Top