Martin 2011
Print Lurker
- Joined
- Jun 23, 2017
- Messages
- 3
- Reaction score
- 0
- Points
- 2
- Printer Model
- epson r2880
Hi all,
I'd just changed the inks in a Marrutt CIS system and went to try my R2880 and it failed to come on afterwards. Having plugged it in and pressed the power button, the power light gave a half-second flash, went out and then nothing. Turning the power button off and on again has no effect - not even the flash, but if the power lead is disconnected or turned off at the mains, the power light will flash once again when the power button is pressed. And that's all it does.
Any ideas anyone?
Martin
I'd just changed the inks in a Marrutt CIS system and went to try my R2880 and it failed to come on afterwards. Having plugged it in and pressed the power button, the power light gave a half-second flash, went out and then nothing. Turning the power button off and on again has no effect - not even the flash, but if the power lead is disconnected or turned off at the mains, the power light will flash once again when the power button is pressed. And that's all it does.
Any ideas anyone?
Martin