Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file

[Epatcola]

I just started scanning 800 patches, and the PowerShell GUI isn't working for them

My guess would be a bug in your script. Did you compare generated .ti3 files from your script and the working awk script?

 

[superjudge]

My guess would be a bug in your script. Did you compare generated .ti3 files from your script and the working awk script?

Maybe? Is converting 200, 300, and 450 patches different than 800 in some way I should look for?

Fortunately, it keeps the temp folder until it successfully finishes Colprof, and the process sticks on Colprof.

My guess was Start-Process, Start-Thread, Start-Job—the CSV to TI3 is relatively easy to do in Powershell, and I got that working consistently with little trouble. But, anytime you start a cmd process, which is required to run colprof, consistency and expectation go out the window. I wanted to background the job so the UI wouldn’t freeze, and that didn’t work. The logging would suddenly dump out after the ICC was completed, in either PS5 or PS7, and it hates the way you have to pass arguments to colprof.exe—which is _relatively_ standard.

Nothing should be more complicated, but sometimes it just is. At any rate, it should be easy enough to run a CSV through the GUI until it hangs, then run the TI3 through Colprof to verify it actually works, then work my way back through why more definitively.