Search results

I'm sorry for the omission;. I just had purchased the paper on Ebay and those numbers were in the description which iI had thought to be the part number. Now checking it out on the internet the actual is SO41409 Epson preimum luster paper. I will be using the New PC ink sets. Thank you for...

You will find them on Ebay

I downloaded icc profiles for epson premium luster paper for pc color ink. there are four of them available but not sure which one to use for epson epson premium paper 1270-2000P . I want to use it to print on my canon Pro 100 printer to print 13 X 26 prints.

Ok, I have confirmed what you all have said about the electronic chips on carts being color specific. I had several different flushed carts with chips and tried to swap those one at a time into a different color slot in the printer. In all but one time the printer accepted them without a...

That's a very good explanation mikling and it is something that I would have expected to happen based on what jtoolman said. I was quite surprised when nothing happened and the check printer status showed the ink status as it normally would appear with a correct color ink cart.. Out of...

I took an empty flushed Cyan Cart and inserted it into the magenta slot in the pro-100 printer. I expected i would see some kind of error message after I closed the lid. No message popped up. I did a ink status check in the my printer software and it seemed to recognize the cart as a magenta...

I am curious if the electronics chips are specific to ink colors or are they interchangeable between different color carts. To me this would be good to know if you had a chip failure on a cart, but had a good chip on a different color cart to replace it. I am using a canon 100 pro

Ok, reading the reply about the Pharmacist formula I am left to ask what purpose it serves in the cart flushing process when the ink has previously been flushed and cleaned with distilled water? I do see some of the sponges in my distilled water flushed carts still have a light tinge of color...

I meant to say sorry to get back so late to everyone.

Sorry to get back to everyone on this. thank you for posting replies to my question about drying the carts after flushing them. Someone in the forum stated that they use the pharmicist formula instead of distilled water for flushing carts what is a pharmist formula? Why would he have done that...

I'm looking for a procedure on how remove residual water from CLI-42 carts after flushing and cleaning them with distilled water. The Youtube precision colors video on flushing these carts mentions another video on how to remove the residual water. I cannot find it. Additionally once you have...

Thanks toolman . You are correct it is a hidden factor. I called Precision Colors today and talked to Mike. He is quite a guy and spent much time guiding through the lightroom ICC setup. What you say here was one of the things I learned. It turns out that my lightroom ICC setup had been wrong...

Thank all of you for your replies to my question.. Mr Toolman has opened new questions for me. I have much to learn about how ICC profiles work with hardware and software. Currently for my canon carts I followed the precision color EZ directions for installing the ink ICC profile into the...

thanks for your reply. I don't have a custom profile that accommodates both the paper and ink. I use lightroom which I assume manages the printer. However it uses the canon pro luster profile which leads me back to my question.

Hi I am a bit confused about icc profiles. I will use my printer as an example. I use a Canon pro 100 and my paper is canon pro luster, my ink is non OEM (Precision colors). Here is my question: When configuring the printer using the Canon ICC profile for pro luster paper, my understanding is...

Maybe I am missing something here?????? I assumed that you had re-sized it to the 250 wide Pixel requirement and you were showing me what it looks like. It looks fine, but when I looked at it's properties it says it is 576 pixel wide by 768 pixel high so not sure what you are telling me.

I was going to submit a photo here that looked good until I re-sized it to the 250 pixels required width. It was then unworthy of submission it looked like crap. So I tried another photo with the same results. Anybody with advice on how to re-size a jpeg photo and have it remain decent at 72PPi...

My printer problem is resolved. Initially I had magenta vertical stripes through my prints and the nozzle check confirmed that the magenta color had problems. I followed the advice of the hat earlier in this thread. I did a methodical cleaning soaking for 24 hours, dumped the water and repeated...

That's very interesting and informative Joe. Maybe it would be a good idea to wipe the squeeze bottle metal tube with alcohol before each refill. In my case the ink was less than a year old and I have just switched over to the new PC inks. I am hopeful as to what you describe is not my problem...

Joe you know a lot about this stuff and I am listening. Fungus ??? Is that the product of using non OEM ink or other issues such as using clean carteds? I am sure hoping that I can reconcile my problem by doing the soak. I do have a question however. Would it be advisable to clean the print...