Update for epson r290 .my friend couldn't find any sign of burn .so returned to me. I removed the printhead and the logic board ,both of them were shorted after testing them carefully . I ordered 2 printheads and logic board from Amazon but unfortunatly all of them are not working . So I...
Thank you for reply. I didn't use any cleaning fluid , I used the head cleaning option of its software. I gave it to my friend ,he has experience with electronics and computer hardware . I will update you if any thing happen.
Thank you
Hi dear
I have an old epson r290 ( it was new) stored for long time in its original box . Unboxed and i put ciss and turn it on to print some photos , the print was not OK I did nozzle check and clean twice because nozzle check was not good I turn it off and left it for the next day, next day...
i have HP 1410 all-in-one printer .copying and scanning become black (full black page), the scanner bulb become dimmer, i am planning to take the bulb from non-working HP 1215 all-in-one printer which is exactly the same shape of the 1st one . is it compatible or not?
thank you
first of all you have to have a working ink cartridges so that you can start your printer, print nozzle check , see what is wrong (if there is) and fix accordingly. for ink cartridges check these sites.
https://www.tomatoink.com/Epson-Stylus-Photo-2000P-Ink-Cartridges...
Hp also offer printer with ink tank.
http://www8.hp.com/ph/en/printers/deskjet-gt.html
for canon.
https://petapixel.com/2016/12/28/canon-g-series-megatank-printers-use-refillable-ink-tanks-not-cartridges/
Epson L series or ET series are good alternative , they are chipless and have good capacity external ink tank which allow to print 6000-7000 pages before you need to refill again. you can use 3rd party ink, and reset the ink level counter with wic reset utility for free, better than hp printers...
@turbguy is 100% correct . there is air trapped in the printhead .why photo print is good ,because the working nozzle will compensate for non working one . in photo printing the speed become slow but the print head move over the same line several times injecting more ink on the same point which...
this is ink starvation usually occur when you use new system, it is air trapped in the print head causing misfire . prime the cartridges again to ensure that there is no air in the outlet of the cartridges , install the system ,do print head cleaning cycle twice, if there is still missing nozzle...
check the rubber seal of the print head, Hp CISS usually come with extra thick rubber seal to replace the existing one. and make sure that the ink bottles are in level with the printer.
first try to check the existing setting for any accidental changes which may occur during work.
second try this basic manual and go to page 24 onward .it may help solving the problem.
good luck
it is your decision whether to use OEM or NON-OEM ink because you are the one who will face the problem if it happened ,each of them has its own pros and cons, there are good experts in this forum and they will give you their experience for each of them . if you will choose NON-OEM then go for...