What Are You Currently Printing?

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
904
Reaction score
1,093
Points
258
Location
Kmt. 0.
Printer Model
Canon MB5150,Pro10s,Prui3Mk3s+
3D printing helping old flat 2D printers.
A couple of basic but sturdy boxes to keep safely sets of carts for my Canon Pro10 and Maxify printers.

Do you fancy the ‘champagne cork’ handle ? :p. It’s not glued to the lid but screwed so I can replace it with other silly designs..:rolleyes:


thum-capses carts 1.jpg
thum-capses carts 3.jpg
thum-capses carts 4.jpg
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
14,139
Reaction score
7,661
Points
433
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP3
Beautiful job @Artur5, very neat and compact, and I would love to have all my carts in a lovely box like yours but I have more than 75 PGl-9 carts, and I’d need quite a few, so I decided to stack mine for easy access..
P.S. did the screw cap not stop the lid on the Maxify carts box from closing..


1622316312389.png
 

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
904
Reaction score
1,093
Points
258
Location
Kmt. 0.
Printer Model
Canon MB5150,Pro10s,Prui3Mk3s+
Only 75 ?.. o_O
I have 15 PGI-72 carts and that seems too much already,

P.S.
No problem for closing the lid. The screw protrudes just 3 mm. below. It's not easy to see it on the photos because of the perspective from above, but the carts are 5mm. lower than the outer walls of the box. so there's a clearance of 2 mm
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
14,139
Reaction score
7,661
Points
433
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP3
Only 75 ?.. o_O
I have 15 PGI-72 carts and that seems too much already,
I had 3 printers using these carts so extras are essential..
the carts are 5mm. lower than the outer walls of the box. so there's a clearance of 2 mm
Well taught out so good on you,.. :thumbsup
because I’ve fallen into that trap before..:(
 

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
904
Reaction score
1,093
Points
258
Location
Kmt. 0.
Printer Model
Canon MB5150,Pro10s,Prui3Mk3s+
To tell the truth, in the Maxify box I overlooked the internal walls. They're only 1 mm lower than the top. Luckily, as the compartment for the black cart is wider than those for CMY, the middle wall isn't centered so it clears the screw of the lid, but it's a close shave !. For the Pro10s box I corrected that; the internal walls are level with the top of the carts.
 

zeus9

Newbie to Printing
Joined
Sep 18, 2021
Messages
2
Reaction score
0
Points
6
Printer Model
Canon i560
Currently I am printing a sketch of my favorite rapper mac miller. I am huge fan of him but sadly he left us too early. I still remember I bought a wireless headphones just for listening his songs all time.
 
Top