What Are You Currently Printing Today?

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
1,294
Reaction score
1,618
Points
278
Location
Kmt. 0.
Printer Model
MB5150,Pro10s,i3Mk3s+,Voron2.4
3D printing helping old flat 2D printers.
A couple of basic but sturdy boxes to keep safely sets of carts for my Canon Pro10 and Maxify printers.

Do you fancy the ‘champagne cork’ handle ? :p. It’s not glued to the lid but screwed so I can replace it with other silly designs..:rolleyes:


thum-capses carts 1.jpg
thum-capses carts 3.jpg
thum-capses carts 4.jpg
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Beautiful job @Artur5, very neat and compact, and I would love to have all my carts in a lovely box like yours but I have more than 75 PGl-9 carts, and I’d need quite a few, so I decided to stack mine for easy access..
P.S. did the screw cap not stop the lid on the Maxify carts box from closing..


1622316312389.png
 

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
1,294
Reaction score
1,618
Points
278
Location
Kmt. 0.
Printer Model
MB5150,Pro10s,i3Mk3s+,Voron2.4
Only 75 ?.. o_O
I have 15 PGI-72 carts and that seems too much already,

P.S.
No problem for closing the lid. The screw protrudes just 3 mm. below. It's not easy to see it on the photos because of the perspective from above, but the carts are 5mm. lower than the outer walls of the box. so there's a clearance of 2 mm
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Only 75 ?.. o_O
I have 15 PGI-72 carts and that seems too much already,
I had 3 printers using these carts so extras are essential..
the carts are 5mm. lower than the outer walls of the box. so there's a clearance of 2 mm
Well taught out so good on you,.. :thumbsup
because I’ve fallen into that trap before..:(
 

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
1,294
Reaction score
1,618
Points
278
Location
Kmt. 0.
Printer Model
MB5150,Pro10s,i3Mk3s+,Voron2.4
To tell the truth, in the Maxify box I overlooked the internal walls. They're only 1 mm lower than the top. Luckily, as the compartment for the black cart is wider than those for CMY, the middle wall isn't centered so it clears the screw of the lid, but it's a close shave !. For the Pro10s box I corrected that; the internal walls are level with the top of the carts.
 

Lelopes

Getting Fingers Dirty
Joined
Sep 28, 2021
Messages
31
Reaction score
37
Points
48
Printer Model
Canon IX6810
It’s anything 3D related.. real or otherwise.. even inkjet printing Pics of a 3D printers..:)
Thank you, I asked cause in mobile version it wasn't showing in Wich category it was posted, only as "everything else". Will search a similar one for 2d prints since my 3d printer is cornered for mor than a year by now. 😅
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Will search a similar one for 2d prints since my 3d printer is cornered for mor than a year by now.
Sorry about that, but @Nifty did start this thread off here and who’s going to argue with him, maybe it’s a reminder for you to dust off your Auld 3D printer and get going on something new..:)
 
Top