hi, i posted the problem already to adamj, here http://www.nifty-stuff.com/forum/viewtopic.php?id=562,
but just want to open this question again. due to the down of the fixyourownprinter site, i look for help here.
after full waste ink tank message i cleaned the ink pads, not the "tank". Then i tried to reset the waste ink tank counter, with all the little helpful instructions i found in this forum. But it didnt work.
I followed this:
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME (while still holding down the POWER)
3. press RESUME twice, then release POWER
4. The green light will blink and the printer will make some noise. Wait until this is finished, you are now in the
printer's diagnostic mode.
My i250 continues to blink seven time orange, - it seems not possible to enter programming/ data functions.
I tried it with the printer-head in and out.
I found some posts with a link to the fixyourownprinter.com forum, but today, - this site is down.,
So, anybdy can telll me the secret of the i250?
thanks
but just want to open this question again. due to the down of the fixyourownprinter site, i look for help here.
after full waste ink tank message i cleaned the ink pads, not the "tank". Then i tried to reset the waste ink tank counter, with all the little helpful instructions i found in this forum. But it didnt work.
I followed this:
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME (while still holding down the POWER)
3. press RESUME twice, then release POWER
4. The green light will blink and the printer will make some noise. Wait until this is finished, you are now in the
printer's diagnostic mode.
My i250 continues to blink seven time orange, - it seems not possible to enter programming/ data functions.
I tried it with the printer-head in and out.
I found some posts with a link to the fixyourownprinter.com forum, but today, - this site is down.,
So, anybdy can telll me the secret of the i250?
thanks