variable luck resetting carts on Epson 1430

[Paul W.]

Just tried it from my posted link and still works for me. If it doesn't work for you then the part number is in the posted link:

1560247

Thanks for finding the that number, Stratman. I don't need to retrieve that number now... but just to add this technique to my computer knowledge for future situations, would you please tell me how you did that? I think I'm not clicking properly on the 133 field.

Thanks!

 

[Paul W.]

Thanks all, I found a couple of sources - one in the UK and one in the US.

Good sleuthing!

 

[stratman]

would you please tell me how you did that?

I used Google, probably searched on "epson 1430 stacker assembly". Eventually I looked at Epson's web site and found Support and then able to find the US distributors I linked in my post.

I'm not clicking properly on the 133 field

Click on the column for the part number, not the 133 - it toggles to the exploded diagram of the printer.

Hope you can get your replacement tray.

 

[Paul W.]

Clicking on the column for the part number did the trick, stratman, thank you!

 

[Paul W.]

I think I have a spares/repair 1500W (same model as the 1430, just the EU designation) so as/when I get a chance I'll take a look for that and let you know if it still has that bit of the tray.

websail: Not to nag! but I'm wondering if you'd had a chance to look at your 1500W.

Thanks,

Paul

 

[The Hat]

I'm wondering if you'd had a chance to look at your 1500W.

Have never taught to ask someone if they could 3D print you a new output tray, it is possible..

 

[Paul W.]

Haven't thought about a 3D print done on a 3D printer. I don't know much about 3D printing but wouldn't I first need a 3D model to scan?

 

[The Hat]

wouldn't I first need a 3D model to scan?

To be successful, yes unfortunately.. Anyone with a camera..

 

[websnail]

websnail: Not to nag! but I'm wondering if you'd had a chance to look at your 1500W.

Sorry, I've been in self-quarantine up until yesterday as I had some mild but significant symptoms. Not had a chance to relocate the printer as yet but I'll add it to my list for next week as I need to go in and get caught up on a raft of things.

 

[Paul W.]

Hello websnail,

Actually you don't need to search ... I found a tray at a parts company: encompass.com

It was about $32 and it was the complete tray, all three extensions. I only needed the most extended of the three but that's the only way I could get it. Just posting that information here for future reference, Epson parts are hard to find.

I hope your health improves... this virus is a nasty bug, as you well know.

Regards,

Paul