rodbam
Printer Master
- Joined
- Mar 9, 2011
- Messages
- 773
- Reaction score
- 173
- Points
- 213
- Location
- Australia
- Printer Model
- Canon Pro 9000 mk2 & Pro 9500
I'm just a newbie learning heaps here, thanks all. I'm a little confused about the two most popular ways to refill a cartridge.
1...Fill from the top into the empty chamber by removing the OEM plug & refitting a new one.
2.. The so called German way of making a small hole in the bottom side of the sponge chamber.
Seeing as both methods inject ink into the empty chamber how is one considered better than the other?
They both seem to be about the same amount of effort & I'm a bit confused as to which one to use for my first refill.
Seeing as both inject into the empty chamber I can't see how this affects leakage, or does it?
Regards Rod
1...Fill from the top into the empty chamber by removing the OEM plug & refitting a new one.
2.. The so called German way of making a small hole in the bottom side of the sponge chamber.
Seeing as both methods inject ink into the empty chamber how is one considered better than the other?
They both seem to be about the same amount of effort & I'm a bit confused as to which one to use for my first refill.
Seeing as both inject into the empty chamber I can't see how this affects leakage, or does it?
Regards Rod