PrinterOwner
Newbie to Printing
- Joined
- Jan 12, 2020
- Messages
- 3
- Reaction score
- 5
- Points
- 5
- Printer Model
- HP 1510
Printer: HP 1510
Cartridge: 678(black)
Ink: Prodot Prolite IP-HQ05-PK Black Inkjet Ink (pigment ink)
Hello,
I have refilled my HP 678 cartridge for the first time. In doing so, i performed the following steps:
I have even tried pulling the label up from one of the holes to allow unrestricted air passage into the cartridge. But no breakthrough.
When put/rubbed against a napkin, ink flows out of the cartridge's printhead smoothly and from the entire length of the printhead.
Any suggestions?
Cartridge: 678(black)
Ink: Prodot Prolite IP-HQ05-PK Black Inkjet Ink (pigment ink)
Hello,
I have refilled my HP 678 cartridge for the first time. In doing so, i performed the following steps:
- Took the cartridge out of printer.
- Removed the cartridge label.
- Dropped the ink slowly & gradually onto the sponge (instead of injecting it deep inside the cartridge (in order to avoid physical damage to sponge)(motivated by the mechanism of Continuous Ink Supply System (CISS)).
- Pulled back some ink when the cartridge began to overflow/ooze with ink.
- Put the cartridge label back on top of the cartridge.
- Put back the cartridge into the printer and tried taking printouts the next day.
I have even tried pulling the label up from one of the holes to allow unrestricted air passage into the cartridge. But no breakthrough.
When put/rubbed against a napkin, ink flows out of the cartridge's printhead smoothly and from the entire length of the printhead.
Any suggestions?
Last edited: