Alan_B
Newbie to Printing
- Joined
- Aug 25, 2020
- Messages
- 4
- Reaction score
- 0
- Points
- 6
- Printer Model
- Canon Maxify
Hi,
anyone know how to remove the side panels of an MB5150? I've removed the four screws from the front, top and back and released the two clips from the underside but there's still something holding it at the front.
I've been given the printer wirth a 504 error, the previous owner had refilled a cartridge and it has leaked ink everywhere. I need to clean the insides. I've stripped down a few plotters in the past to maintain them so I'm not phased by this, but don't want to break the case!
Thanks for your help. Alan
anyone know how to remove the side panels of an MB5150? I've removed the four screws from the front, top and back and released the two clips from the underside but there's still something holding it at the front.
I've been given the printer wirth a 504 error, the previous owner had refilled a cartridge and it has leaked ink everywhere. I need to clean the insides. I've stripped down a few plotters in the past to maintain them so I'm not phased by this, but don't want to break the case!
Thanks for your help. Alan