wcandrews@sccoast.net
Getting Fingers Dirty
- Joined
- Nov 29, 2010
- Messages
- 63
- Reaction score
- 10
- Points
- 41
I have been keeping s spreadsheet about the ink usage of the Pro-100. The table doesn't format well on this forum so I have uploaded the file as a PDF if you desire to see it.
The results are quite impressive. There is a total of 4416 sq. in. of color area and includes 43-8.5 x 11 sheets and 4-13 x 19 sheets.
As suggested before, the light gray caused the first warning. As will be my normal practice, I'll reset and refill all eight carts at this point.
I have been using the Precision Colors profiles with OEM ink, and they are a fairly close match for the OEM ink. This last batch of about 20 shots were of fall color in the North Carolina mountains. The colors of the prints looked good. but were not as good a match to the monitor as I require. They are good enough to keep using for non-critical work until I am on all Precision Colors ink. At that time. I'll make my own profiles with xRite iT1 stuff.
This really is a grand printer, and by the way, it is the quietest printer I have ever used.
Good Luck!
Wil
The results are quite impressive. There is a total of 4416 sq. in. of color area and includes 43-8.5 x 11 sheets and 4-13 x 19 sheets.
As suggested before, the light gray caused the first warning. As will be my normal practice, I'll reset and refill all eight carts at this point.
I have been using the Precision Colors profiles with OEM ink, and they are a fairly close match for the OEM ink. This last batch of about 20 shots were of fall color in the North Carolina mountains. The colors of the prints looked good. but were not as good a match to the monitor as I require. They are good enough to keep using for non-critical work until I am on all Precision Colors ink. At that time. I'll make my own profiles with xRite iT1 stuff.
This really is a grand printer, and by the way, it is the quietest printer I have ever used.
Good Luck!
Wil