1. Dismiss Notice
  2. Picture Of The Week (POW) Information and Submissions
    CLICK HERE!
    (if you are logged in, this notice can be dismissed using the "x" to the top right of the notice)

    Dismiss Notice
  3. Official PK Poll: Is there any future in refilling?
    CLICK HERE!
    (if you are logged in, this notice can be dismissed using the "x" to the top right of the notice)

    Dismiss Notice
  4. PK Featured Thread: Health & Safety and 3D Printing.
    CLICK HERE!
    (if you are logged in, this notice can be dismissed using the "x" to the top right of the notice)

    Dismiss Notice

Power Outage

Discussion in 'Canon InkJet Printers' started by PalaDolphin, Sep 16, 2019.

  1. Sep 16, 2019
    PalaDolphin

    PalaDolphin Printer Guru

    Joined:
    Jul 25, 2016
    Messages:
    215
    Likes Received:
    91
    Trophy Points:
    127
    Location:
    Saint Paul, MN
    Printer Model:
    Canon Pro-100, HP 7760, RX500
    Just before I sat down to dinner, I looked at my Canon Pro-100 and powered it down. I was done printing for the day and thought about something I learned how it's not good to leave it powered on because a power outage would cause a large amount of ink loss when it comes back up. Well, we had a rare power outage last night. I was excited because after my old laptop had died I just bought a new one a couple of weeks ago. I used my smartphone as a hotspot to get back online and continued playing on the internet.
     
  2. Sep 16, 2019
    The Hat

    The Hat Printer VIP Moderator

    Joined:
    Jan 18, 2010
    Messages:
    11,716
    Likes Received:
    5,456
    Trophy Points:
    403
    Location:
    Wicklow Ireland
    Printer Model:
    Canon were, BUT 3D is better..
    And... ! ! :hu
     
  3. Sep 16, 2019
    mikling

    mikling Printer VIP Platinum Printer Member

    Joined:
    Jul 2, 2006
    Messages:
    3,046
    Likes Received:
    1,339
    Trophy Points:
    313
    Location:
    Toronto, Canada
    A large amount of ink loss on the Pro-100 is still a LOT LOT LESS than a normal head cleaning on an Epson!
    If you were using OEM ink, then that might be a real concern but when refilling, it really is nothing to really worry about especially when used in conjunction with a resetter. Relax and ease the tension about ink costs.
     
  4. Oct 3, 2019
    PalaDolphin

    PalaDolphin Printer Guru

    Joined:
    Jul 25, 2016
    Messages:
    215
    Likes Received:
    91
    Trophy Points:
    127
    Location:
    Saint Paul, MN
    Printer Model:
    Canon Pro-100, HP 7760, RX500
    And I won at poker?
     
    The Hat likes this.

Share This Page