- Joined
- Jan 18, 2010
- Messages
- 15,928
- Reaction score
- 8,934
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
I needed two prints on glossy paper that had to register with each other so I wasn’t going to chance the Maxify, its good but spot on registration is not one of its finer points. Or waking the the Pro 9500 for a throw away print..
So I cranked up the Auld iP4500 and ran a nozzle check, the pigment black was showing low but I was not going to use that ink so I proceeded to print off my two prints and all went well, only then did I refill the pigment black cart, and it had been so long since I did that I’d forgot to reset the chip first..
First Nozzle check..
After cart change
click to enlarge..
This old girl seems indestructible..
So I cranked up the Auld iP4500 and ran a nozzle check, the pigment black was showing low but I was not going to use that ink so I proceeded to print off my two prints and all went well, only then did I refill the pigment black cart, and it had been so long since I did that I’d forgot to reset the chip first..
First Nozzle check..


This old girl seems indestructible..