TopCatToo
Newbie to Printing
- Joined
- Dec 11, 2014
- Messages
- 3
- Reaction score
- 5
- Points
- 9
- Location
- Bedfordshire. UK
- Printer Model
- Canon iP4850, Canon iP7250
Hi,
Just a bit of feedback...........
My iP 4850 recently showed a error indicating the wast ink absorber was full.
Following the advice on this forum, I successfully dismantled the printer, cleaned, dried and replaced the pads and reassembled the printer.
I downloaded the service tool, got it into service mode and reset the absorber value.
And it works!!!
My wife says I sounded really surprised.
Many thanks to all concerned.
Steve
Just a bit of feedback...........
My iP 4850 recently showed a error indicating the wast ink absorber was full.
Following the advice on this forum, I successfully dismantled the printer, cleaned, dried and replaced the pads and reassembled the printer.
I downloaded the service tool, got it into service mode and reset the absorber value.
And it works!!!
My wife says I sounded really surprised.
Many thanks to all concerned.
Steve