hp deskjet 1000 with ciss - ink Leak

turbguy

Printer Master
Platinum Printer Member
Joined
Sep 10, 2007
Messages
1,558
Reaction score
1,427
Points
293
Location
Laramie, Wyoming
Printer Model
Canon i960, Canon i9900
Can you explain what
that means?
You took HP ink carts and attached them to the tubes somehow?

Did the kit you bought from DX come with instructions?

Are you aware the elevation of the CISS bottles with regards to the elevation of the print head is CRITICAL?
 

the-magician

Newbie to Printing
Joined
Jun 22, 2014
Messages
11
Reaction score
0
Points
9
Printer Model
hp deskjet 1000
I got an entire set without instructions, and I Googled how to install and installed by this:
https://www.youtube.com/watch?v=7M5l1LSxCuk

I Googled recently realized I need air filter kit that connects the outer containers and I also ordered a facility which pricks the cartridge, it should reach

The height of the containers just outside height of the printer, I put it on the right side of the printer
 

PeterBJ

Printer VIP
Platinum Printer Member
Joined
Nov 27, 2010
Messages
5,064
Reaction score
4,914
Points
373
Location
Copenhagen Denmark
Printer Model
Canon MP990
I don't understand Spanish, but I think this instruction video is better. Even if the printer and the CISS are different models, the install principles are the same. Note that the ink container must stand on the table besides the printer. If you place it higher the cartridges will leak.

 

turbguy

Printer Master
Platinum Printer Member
Joined
Sep 10, 2007
Messages
1,558
Reaction score
1,427
Points
293
Location
Laramie, Wyoming
Printer Model
Canon i960, Canon i9900
I got an entire set without instructions, and I Googled how to install and installed by this:
https://www.youtube.com/watch?v=7M5l1LSxCuk

I Googled recently realized I need air filter kit that connects the outer containers and I also ordered a facility which pricks the cartridge, it should reach

The height of the containers just outside height of the printer, I put it on the right side of the printer
If ink leaks into the printer, I would either LOWER the containers or RAISE the printer 2-3 cm at a time until leaking stops.
 

the-magician

Newbie to Printing
Joined
Jun 22, 2014
Messages
11
Reaction score
0
Points
9
Printer Model
hp deskjet 1000
Okay I will do that, just now I ordered the air filter and it should arrive and then I will add it in.
 

the-magician

Newbie to Printing
Joined
Jun 22, 2014
Messages
11
Reaction score
0
Points
9
Printer Model
hp deskjet 1000
Is the location of the cartridges outside my grasp higher or lower from my hand or is it okay?

image.jpg


image.jpg
 
Last edited by a moderator:

turbguy

Printer Master
Platinum Printer Member
Joined
Sep 10, 2007
Messages
1,558
Reaction score
1,427
Points
293
Location
Laramie, Wyoming
Printer Model
Canon i960, Canon i9900
That did not translate well. Can you ask the same question differently?

Also, is the printer sitting on a aluminium drip catching tray?
 
Last edited by a moderator:

the-magician

Newbie to Printing
Joined
Jun 22, 2014
Messages
11
Reaction score
0
Points
9
Printer Model
hp deskjet 1000
Is it correct the height of the outer tanks of the ink okay?
 

the-magician

Newbie to Printing
Joined
Jun 22, 2014
Messages
11
Reaction score
0
Points
9
Printer Model
hp deskjet 1000
Well friends I'm on the verge of despair I can not solve the problem of leakage from the cartridges despite putting air filters outer containers I still liquid ink cartridge into the printer ...

Who can recommend me another refill kit my printer?
 
Top