mrelmo
Print Addict
ok the thread was getting a little long, just in case i did not read this comment in past threads, here is an observation while using this method. most recently while refilling the yellow (this is the easiest to see) i noticed that i was forcing ink into the sponge area. i realized that i left the OEM cover on the exit port on the bottom while injecting (i have a spare set or carts, when i swap out an empty i tape the oem cover into place). once i removed the cover the air in the chamber had a place to escape and i was no longer forcing ink into the sponge area. if this comment is redundant the moderator can delete it. just an observation