Canon IP7270 (Asia model) uses cartridge PGI-750/CLI-751

DHL

Getting Fingers Dirty
Joined
Nov 19, 2020
Messages
17
Reaction score
6
Points
28
Printer Model
Canon Pro-100 & IP-7270
Does any body know that PGI-250/CLI-251 (for North America model IP7220) can also be used in IP7270 printer or not?

Is firmware control the cartridge chipset recognition or something else?

Can I just upgrade the firmware from Canon US into this IP7270 for using PGI-250/CLI-251 cartridges without any problem?
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,617
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Can I just upgrade the firmware from Canon US into this IP7270 for using PGI-250/CLI-251 cartridges without any problem?
The simplest answer is no, and your best bet is to go with what you have now and just change the cartridge chips to the region you’re in now.. Much more controllable..
 

DHL

Getting Fingers Dirty
Joined
Nov 19, 2020
Messages
17
Reaction score
6
Points
28
Printer Model
Canon Pro-100 & IP-7270
Yes, fully understand now. Chips are hard to be migrated due to the very thin chips board in OEM cartridges. It's a high risk operation.
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,617
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Chips are hard to be migrated due to the very thin chips board in OEM cartridges. It's a high risk operation
If you have a problem moving the chips then, buy a redsetter and there won’t be a need to remove them or buy ARC chips in AliExpress and fit them..

But you must continue to use the PGI-250/CLI-251 chips regardless of where you move too..
 

DHL

Getting Fingers Dirty
Joined
Nov 19, 2020
Messages
17
Reaction score
6
Points
28
Printer Model
Canon Pro-100 & IP-7270
If you have a problem moving the chips then, buy a redsetter and there won’t be a need to remove them or buy ARC chips in AliExpress and fit them..

But you must continue to use the PGI-250/CLI-251 chips regardless of where you move too..
I see. Checking in Aliexpress for the chips. Thanks for the suggestion!
 
Top