I have my printer connected to a ciss. I took a look under the park position. What a mess! Where can I get a service manual to take it apart so I can clean this area?
Every site I look at I cannot find the mp250. all the indexes have every number above and below this printer but it looks like...
The printhead cartridges for both the above printers are the same. I went to a site that deals with CIS systems for Canon. I watched the installation of the heads and did the same to my MP250. When I set the printer to print a test page, it returned an error saying the cartridges are not...
YELLOW LED IS FLASHING EIGHT TIMES INDICATING WASTE INK ABSORBER IS FULL. PRESSED YELLOW BUTTON AND WAS ABLE TO PRINT ADDITIONAL SHEETS. NOW I CANNOT EVEN PRINT ANYTHING. THE EEPROM WILL NOT RESET. I GET A RED CANNOT PRINT INDICATION ON THE MONITOR. TYPICAL RESETTING PROCEDURES [PRESS POWER...
I'm trying to find parts for a canon pixma 1p2600. the reason I feel my ink is back siphoning to the tanks is that the two pads that collect ink during the clean process when the heads are in park, isn't sealing the printhead and air is getting into the heads.
I replaced the sent cartridge with a standard mp160 - c-41 tri color ink cartridge because the bubble jet for the yellow wasn't firing. Running the printer through a test cycle advanced the ink through the silicone tubes. When the printer is left standing, the ink siphons back to the tank. I...
Printer turns on, does a self test. Print a test sheet, printer makes all kinds of snapping sounds. Paper feeds around back and through area under print heads and gets jammed. Paper rips and error light comes on. Print carriage is free to move either direction.
I have a walmart special at $29.95 that I fitted with a ciss from the UK. I've had the system since April of last year. When ink got low I just refilled the reservoir tank and kept on printing. I had a problem of cross contamination between dye ink and pigment ink so I flushed out the...
I refilled my yellow ink tank today and noticed some whitish crap that settled out in the bottom of the tank. anybody know what this is? I never noticed it before......
I purchased a CISS from a place in the UK. It performed flawlessly for over a year then started giving problems with the BLACK ink. Images were missing, images were blurry. After a lot of thinking, I had a bottle of ink that I used that must've been pigment based ink. Pigment based and dye...
I have an el cheapo Canon printer from Walmart with a continuous ink system installed. I started a cleaning process to the printheads and noticed the colored inks spray out very nicely, but the black ink just sort of drips out - no spray. Is the head shot?
I bought a "City Ink Express" CISS system. It took two weeks from date of order to delivery of the system. This was from the UK to the United States to New York. I have a Canon Mp160. I needed to make one modification , well actually two for the system to work properly. First I removed the...
I bought a Canon pixma mp 190 and have already gone through the supplied cartridges. I guess they don't put much in those things. New cartridge prices are outrageous! I had a refill kit from Hewlett Packard and refilled those carts I removed. 20ml in the black and 6ml in each color chamber...