Search results

Hello, last week I ordered the redsetter for the 9500 mk II cartridges. However the seller sent me the PGI-72 v2 redsetter. There's a chance that this resetter is compatible with PGI-9 cartridges of my 9500 mk II too or is a seller error and he have to ship me the correct one?

In the case I will need to change the 9500 MK2 for another printer, given that the 9500 MK2 is very slow, how are the speed of the PRO-10S and PRO-1000 in comparison ? On the 9500 MK2 a print of an A3 medium coverage at 4800dpi (high 2 setting) takes around 5-6 min per print, while a 9600dpi...

Hello, I'm using Colormunki and argyll to profile but I'm limited to around 250 patches per sheet while I would like to go up to 900 patches per sheet like @Emulator do in this post...

Until now because I don't trust so much the resetters I've run everything on ink control disabled. However reading so much about resetters and so on I ordered various resetters. Got one for the MX870 ones, one for the 9000 and one very costly for the 9500. The one for the 870 ones works all...

I'm trying to find in Europe at not too high price (cheap possibly) paper with: - A3 or 13x19" double side - higher than 250gsm - glossy finish or matte finish or even glossy / matte do you have some suggestion? brands, online shops... any kind of coating, not necessarily rc

I have various bottles of inktek pigment ink for the mx870, would like to use it for refill the mbk of 9500, it is possible to do so? Actually using the Inktek mbk on the 9500, but would like to use the inktek mx870 pgi bk because I have lot of it and is also deeper black compared to the inktek...

in these 2 days i printed around 120 pages with the 9500, i noticed that the area above the cartridges is a bit dirty now. Probably after so much printing the air inside the cover got full of micronized ink and dirtied everything a bit. There's some kind of manteinance that I should do...

I can confirm that the 9500 with the ink control function disabled for all the colors start doing clean head after each print. I have to get myself a chip resetter however i tried a trick in the meanwhile. Do a print, just after the print send another or turn off the printer with the front I/O...

Hello, I have a 9500 mkII that I just started running on refills. Previously had original oem cartridges with oem ink, now just refilled them with Inktek ink and ink drop method checking on a scale to not going over 29 grams. I refilled the carts before the original canon ink was totally out...

I know that there are nice paper manufacturers around the US however it's some time I'm looking for some affordable and good manufacturers here in Europe. Just landed on https://www.novalith.com/papiers-photos-rc-c-42_23.html this shop that sells it's own brand paper a little like red river...

Sometimes after a nozzle check everything looks ok, however there could be a small amount of clogging still here. If you cast on an auto head alignment, that is sometimes advised in order to improve print quality expecially on "standard" or fast print modes, you could discover that some inks...

A question about how canon printers handle the borderless settings in terms of counters, based on your experience. If I select borderless generally the extra ink is absorbed by the absorbtion pads. Given that it means that a printer will be able to do a certain number of prints until the pads...

I have to laminate my prints for various reasons, they need to be touched a lot and even creased and folded. I'm getting a professional laminator (big and bulky 70kg weighting one) and various premium BOPP rolls with both lucid and soft velvet finish. Would like to get as many suggestions...

As I understand the printer potty is a substitute for the printer waste unit? Or better to say, it's something that you put in the middle of the waste tubes and waste tank in order to check how much the printer will drop in terms of ink and prevent the real waste tank to being filled? If...

1) Was wondering about these print heads, how much they are supposed to last in terms of pages ? (talking of mx870 printheads) 2) Amzn seem to sell some compatible ones probably chinese brand at 20 € each, are they good at least a bit? (I don't think Canon sell original ones anymore...)

I would like to know in detail what could be the problem in refilling original OEM cartridges without resetting the chips for the pro9000 mk II, pro9500 mk II and imageProGraph PRO-1000 Because i read this in a previous post and I would like to know more. I mean aside the fact that you could...

Given you tried various brands could you suggest me the best non RC photo paper with an adhesive capability? I tried the Labelheaven one it's not bad but I would like to know if something better exists. I would like to use it by attaching it to another side of a matte photo paper in order to...

Hello, I was wondering if do exists some ink decent (something with an acceptable gamut that I can calibrate) quality that I can buy from ebay, amzn or somewhere else that allows me to print waterproof! I'm talking of printing on UNCOATED paper that is the most infamous in terms of water...

Until now I just used them for few print and always handled well. However now I started using them lot more. How are expected to last? Are they able to do 1000 full borderless A3 per month? Could them waste pad become full easily? It is possible to replace it with brand new tissue? Could them...

Hello, if you remember my old posts I had problems with a Pro 9500 mkII, while i still wasn't able to clean the old one i got from a friend another used perfect condition one. So I have now 2 Pro 9500 MkII But apart the printers I would ask here about the cartridges... Since my bought in 2013...