Search results

The OP used Argyll with ChromIQ in hid attached text file which may have been what tripped him up. I cannot use Argyll as I have a USB port that feeds a multi-hub that runs around 5-6 other USB devices plugged into it and Argyll fouls that up to the point even the wireless USB mouse will skip...

Just saw this thread as I have an i1 Pro 3 also. Today I had to sort out the TC9.18 as my default save folder was not the x-rite one, so I got that sorted and printed two pages of the TC9.18. Soon as I saw the output I knew something was way off using Epson Ultra Premium Luster from an...

I bought the SilverFast Ai Studio 9 to make profiles using my old Epson flatbed scanner. Not cheap along with the it8 Version 2 target needed for calibration of the scanner, about $430 for the pair. Had all sorts of difficulties using it, and I was never pleased with the result, even edited...

My ColorMunki Photo began to be erratic. It would start in the ColorPicker from x-rite to spot read a color, but when I used the swivel USB hinge the thing would reset and need another calibration again. I thought it was maybe the USB cable so I bought a new one. Still erratic in operation...

Well, I managed to kill the vivid magenta totally. I ran the Piezoflush into the cleaned out cart and fed it to the printer for many flushes. No improvement, and nozzle checks were getting more sparse. Tried a cart full of Windex and alcohol and now got zero nozzle checks showing up on paper...

If you switched to a 3rd party ink, you likely will not see the damage - if that is the cause - immediately. It will slowly creep up on you, imhe. For some bizarre reason, even though my repair or cleaning solution Vivid Magenta tank is filled with alcohol and WIndex, and it looks a faint blue...

Since this happened with a non-OEM ink, maybe the ink has a different viscosity and maybe being thicker, might not clear some smaller nozzles as well as the OEM ink would? I got issues with a non-OEM ink now too in the 3880 (below) that seems to have congealed and clogged up my printhead...

My Epson 3880 uses a popular 3rd party ink (IJM) and their refillable carts. Generally, the Vivid Magenta is the one that gives me most trouble for nozzle check errors. It worked well over the past several days, but yesterday maybe 2/3 of it showed blocked nozzles all of a sudden. I did a...

I attended a "Papers or Prints of the World" class at Freestyle Photo in Los Angeles. One thing that came out of it was several of the Epson profiles for their papers are the exact same thing, just a name change of the paper. The profile's color gamut volumes were exactly alike! No way if one...

To me, it looks like the red ink is too weak in the non-oem ink which will show issues in the blues/purples/oranges too. For a comparison, might be worth extracting a drop of ink out of the oem ink cart and the 3rd party and let it run down a sheet of glossy paper and dry to compare their...

I think the latter. No matter if you use software to flush it, or just print large blocks of specific ink colors, you'll need to refill those lines so get an extra maintenance tank handy for the line refill process. I'd also keep squirting some solvent to keep the print head's storage pads...

I have a couple of Epson Stylus Pro 3880s from around 2010 and both are still running. Got two as I wanted to try the piezography B&W ink set in one from the start, but not happy with the results and tedious calibration mess so it became a refillable dye ink printer. One took a major tear down...

Fun, huh? It is a big pita to dismantle the thing, and I get why they consider it "Uneconomical to repair" with the time it takes to dig into it. I never have replaced the dampeners in my two as a plug often resolves itself after a lot of cleaning and sitting around in a wet paper towel...

Thanks Hendrik. I'll get back to it later. I need to go profile a printer now (i1 Photo 3) as the color has wandered a bit. Been using the new Print Prism software thing and I'm seeing some slight density issues in the blacks between it and the i1 Profiler 3 software, maybe some BPC...

I've been playing with this and ran into a problem where the .quad file it makes is compressed somehow and Peazip will not uncompress it and instead throws up an "Error" message. As such, I cannot place it into QTR either for it to be recognized. Got a bit lost in the math in the Appendix A...

ColorThink Pro 3.05 says the color gamut volume of the WF-7840 is 487,867. The supported ET-8550 is 508,861. Not a huge difference, or about 4% less for the WF-7840, and unlikely it would be seen by most people.

I own a copy of SilverFast Studio AI 9 that I use with an Epson Perfection 600 scanner. It uses a it.8 Version 2 target for a reference prior to scanning for a printer profile. Not a cheap software with the it.8 target, maybe $400. I also bought a Canon LiDE 300 scanner and Print Prism given...

Maybe use some edit program and make the entire sheet of paper magenta with whatever RGB values that is? Maybe (R=255,G=0,B=255\)). It is represented by the hexadecimal code #FF00FF. I know Qimage Ultimate has a selection of various colors they use for a purge page, but that is Windows only...

If I were looking to buy another printer (I have six already!), I'd get the Epson Ecotank ET-8550 which is on sale for $599 at my local Office Depot from the normal $800+ they had it at. Couple it with Qimage's "Print Prism" ($35) which it works with, and you can use its onboard scanner to make...

Fwiw, I had to remove Argyll as it was causing some USB port issues with the x-rite and Calibrite software. Seems it was scanning the USB port and the connected device when it was in operation with other software causing an issue, almost like double-profiling. I also had some issues with my...