Recent content by Miikael Volkonski

But this is the thing - it's happening with any paper. In this case Fomei Portrait Matt 230g - a proper InkJet paper. Discovered this already a while ago https://www.printerknowledge.com/threads/offset-paper-icc-profiles-and-borderless-printing-problems-with-pixma-pro-10s.13228/#post-114344

Checked the print head. There was no clogged ink underneath it. Cleaned it anyway, but the problem persists. I printed some Grayscale images and I could hear the print head rubbing against the paper. In this case Fomai Portrait Matt 230g - a proper InkJet paper. This time there were no smudges...

Done. And no effect. Btw, paper was stored in the box - perfectly straight. The problem cannot be there. Happens with all the papers. What about cleaning the underside of the print head? I found some videos about removing the print head of other Canon printers and it looks fairly simple. Remove...

Right, but is it possible to move the ink tanks out of the way to the most left? I don't think my hand can fit in there to mop. Are any window cleaner OK or should it be a certain kind? Like not contain water for example?

How do I get inside there? Just open the lid and spray from there or... ?

But is it OK to use it all the time? Because when I use this I get a warning that the print quality may be affected. Also, I've used that paper before and this problem has not occurred. Then I printed an image using the profile from the manufacturer. Now, when it happened, I printed the...

Hmm, it looks like the problem is not with the paper. The print head rubs against the paper now even with Fomei InkJet paper... What could be causing this?

Thanks. Did not know this. I looked for something like "set the hight of the print head" in the settings. :) But how come with Canvas the paper does not wave, but dark colors come out deep and beautiful?

OK, I've run some tests now. I've been using Rives Tradition 300g paper for all my tests. Reducing the Intensity by 10 or even 20 still made the paper wave. Same with Brightness set to "Light". BUT when I compare the darker patches on the calibration sheet, then those printed with Canvas as the...

Thanks. This is also an option. I'll have to do some tests now. For example, if I lower the intensity when printing both the calibration sheets and then the actual print, then I should, in theory, get correct result, right? I mean as long as the print options are identical for calibration and...

Of course! Totally forgot about this tab in the options! :D Can't wait to get back home to try! I'll get back here with results.

Hello all, This is my first post. Tried to search, but I don't even know how exactly to search for this, so if you know a thread where this is discussed you're welcome to refer. :) I am trying to create ICC profiles for different offset papers for my Pixma Pro 10s. I find the printer does a...