[Tool] ChromIQ – a macOS and Windows GUI for ArgyllCMS printer profiling (v3.13.0-beta)

[pharmacist]

Yes, but only for the profile generating process, not for scanning. That is done with it's own proprietary program and only patch by patch.

 

[rjanowsky]

Thanks. I will go with this target and make some prints afterwards.

@pharmacist

I made a profile with the recommended target set and printed some B&W test images. Visually and measured the prints are nearly dead neutral. For me, it's perfect!

 

[mavtop]

Yes, but only for the profile generating process, not for scanning. That is done with it's own proprietary program and only patch by patch.

sad to read this,

today i tried with windows 11, no good news, but i built an USB-A cable to use with my 100W power adapter to give enough power to the old USB-2.0 hub, when i linked the usb hub and tried the i1pro1 device all seem to work, after 3 minutes of attempts (to see if it was stable) it begins to give calibration errors (out of tolerance white from the plate) again.

So i have two i1pro1 that both seem broken.