Latest activity
-
pharmacist reacted to crenedecotret's post in the thread Python GUI to generate TI1 files for ArgyllCMS and convert to i1profiler patch set with
Like.
As a followup, if you want to use an X-Rite unsupported device with ArgyllCMS without using i1profiler (say an old ISIS bought off ebay)... -
pharmacist replied to the thread Python GUI to generate TI1 files for ArgyllCMS and convert to i1profiler patch set.Hi @crenedecotret : that was some fantastic job you did with help of AI. I have generate a ti1 file and used ArgyllCMS to generate a...
-
-
Ccrenedecotret replied to the thread Python GUI to generate TI1 files for ArgyllCMS and convert to i1profiler patch set.As a followup, if you want to use an X-Rite unsupported device with ArgyllCMS without using i1profiler (say an old ISIS bought off ebay)...
-
pharmacist reacted to crenedecotret's post in the thread Python GUI to generate TI1 files for ArgyllCMS and convert to i1profiler patch set with Like.
Hello everyone... WIth a little bit of AI powered help, I was able to create a method to use ArgyllCMS as a patch generator for...
-
Ccrenedecotret posted the thread Python GUI to generate TI1 files for ArgyllCMS and convert to i1profiler patch set in Printing Photos and Photo Software.Hello everyone... WIth a little bit of AI powered help, I was able to create a method to use ArgyllCMS as a patch generator for...
-
CConradH replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Yes, I'm always thrilled to do my bit :barnie Anyway, I suspect reading and writing to the CR30 (which I often type wrong as CM30 and...
-
EEpatcola replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.That would be much more complicated. I envisage a jig like this The CR30 is a loose fit in the jig main part. The collar around the...
-
-
CClydeMeneses replied to the thread which Printer+Scanner with bottled ink shoukd I buy - Epson or Canpm?.I agree, longevity between Canon and Epson bottled inks isn’t a big deciding factor anymore. It really comes down to what you need day...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.The reading can be done too by sending a pulse to the CR30: the ColorQC2 software can perfectly read a patch by pressing on the button...
-
pharmacist reacted to Epatcola's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
I see ConradH asking about CR30 communications on DPReview. I don't participate there. FYI the CR30 USB interface is just a serial...
-
CConradH replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.The Bluetooth connection is super convenient so I'm starting to look at that with Wireshark. I see the data but I'm still too green to...
-
I have 2 laser printers; One, a Brother HL-2270DW prints faded smudginess over the whole page rather than crisp clear text on perfect... -
-
EEpatcola replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.I see ConradH asking about CR30 communications on DPReview. I don't participate there. FYI the CR30 USB interface is just a serial...
-
AArtur5 replied to the thread Canon Maxify MB2720 - Excessive Automated Self Cleaning Routines?.My MB5150 stays most of the time disconnected from the mains outlet (cable removed). I noticed that it performs considerably less...
-
Nnobb replied to the thread Canon Maxify MB2720 - Excessive Automated Self Cleaning Routines?.Nope, it is left always on. I disabled the automatic power saving eco option.
