Latest activity
-
AArtur5 replied to the thread buying advise 3D printer.WARNING : You're about to open a deadly can of worms. Think twice (or thrice ) before entering into the 3Dworld, a land of no return...
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.Hi @Ink stained Fingers The 10x15 cm target is already up to the maximum I can do (192 patches). The i1iO target can be easily scanned... -
palombian replied to the thread Epson P400 Alternative.Let's face it, there are no refillable printers anymore, and those that were are getting old (and should be avoided to buy used). Refill... -
You may have a look to the ET-8550 - a dye ink printer as an ink tank model and a user replaceable waste ink/maintenance box. Even the...
-
I assume that you are looking for a 13" printer if you refer to large format. ? I'm not aware of evidence that an Epson printer would...
-
palombian replied to the thread Canon Pro-10 Nozzle Clogged or Damaged?.It is also understood that only genuine Canon cartridges are refillable (forever), aftermarket ones are useless.
-
palombian reacted to The Hat's post in the thread Canon Pro-10 Nozzle Clogged or Damaged? with
Like.
Don’t be tempted to buy aftermarket carts, its OEM inks your after not 3rd party.. -
palombian reacted to The Hat's post in the thread Canon Pro-10 Nozzle Clogged or Damaged? with Like.
The carts are very easy to flush, but you need a special modified clip, that way you can rinse the cart with Window cleaner using a...
-
Ink stained Fingers replied to the thread You don't need much patches to create a good printer profile.I appreciate the optimization of the 10x15 cm patch sheet to 192 active patches very much, but I actually don't really need much more of... -
LLothman reacted to pharmacist's post in the thread You don't need much patches to create a good printer profile with Like.
Nice to hear. So according to you most will be more than satisfied with this miniature 192 patch target. That would be very interesting...
-
LLothman reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
Let me mention the DeltaE numbers of the last test - I did in this case compare the patch prints done with the 720 patch profile and the...
-
LLothman reacted to pharmacist's post in the thread You don't need much patches to create a good printer profile with Like.
I hope you will report back and see how this target will perform compared to a larger patch size target like 729 or even 2880 patches...
-
LLothman reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
@pharmasist - it works - I printed your 192 patchsheet on a 10x15 cm card and scanned it with the i1io2 robot - it works !!! - that was...
-
Hello everybody, Having alot of experience with 2D printers the last decades, I want to enter the world of 3D printers. Any tips about...
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.Nice to hear. So according to you most will be more than satisfied with this miniature 192 patch target. That would be very interesting...