Xerox WorkCentre 6027 All-In-One Color LED

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
It's ok, write me some models, I'm building knowledge,
also it's very possible to get used ones in good conditions. Lots of offices changes models frequently.
You will get far better answers to your questions if you apply them to Google, they have all the answers..
 

SkedAddled

Printer Guru
Joined
Jun 7, 2018
Messages
147
Reaction score
145
Points
137
Location
West Michigan
Printer Model
PRO-100, MG5320, Xerox 6027
Nearly a year later, and this printer is still delivering finely.

Still on included consumables, print quality is still excellent,
printer remains quieter than most lasers I've experienced,
there's no apparent toner-dumping going on, everything
remains sharp and clear, whether black-only or full-color.

I've printed a lot of DVD/Blu-Ray covers while my wife has
printed a lot of mailing labels with it, and it's holding up
like a champ.

We're close to needing a toner change, and will move to using
hugely-less-expensive third-party carts when the time comes.
These have been on-hand since the initial purchase.

While it may be some time before the toner change,
I'll be sure to update this thread when it happens.
Stay tuned, I suppose.
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
While it may be some time before the toner change,
I'll be sure to update this thread when it happens.
Just keep your fingers crossed that the compatibles work as well as the OEM did, they work better with mono lasers, but with colour they mostly never do..
 
Top