White spots / dust issue, how to eliminate?

[jamiekkk]

Hi,

I am using a Canon iP8750 and around 1 in 3 prints are ruined by dust (ink not hitting the paper so leaves a white spot). They are small, but still, I sell these prints so want them to be perfect.

I am trying to be as careful as possible, keeping the paper boxed and loading just before printing. I am also inspecting the paper and using a dust blower shortly before the paper goes through to try and remove anything but it still happens.

Any tips?

Thanks

 

[The Hat]

I am using a Canon iP8750 and around 1 in 3 prints are ruined by dust

The paper your using may require a back feeder on the printer that will keep the paper flat when printing, the cause maybe the top feeder.. I would suggest switching to a different Media type to solve this issue..

 

[jamiekkk]

The paper your using may require a back feeder on the printer that will keep the paper flat when printing, the cause maybe the top feeder.. I would suggest switching to a different Media type to solve this issue..

Thanks, but I'm still going to be using the same feeder so not sure how changing the paper would make a difference?