Setting Up Canon Pro 10

stevepat

Print Lurker
Joined
Feb 21, 2021
Messages
1
Reaction score
0
Points
1
Printer Model
Canon Pro 10
I just got a Canon Pro 10 which was described as "open box". It came with an extra set of cartridges. When I went to the initial set-up I could see that 1 set of cartridges was already installed. But when I tried to insert the print head the section of the printer that holds the print head and cartridges does not position itself in such a way as I am able to do this. It only moves partially over and not al the way until the middle. Not sure what to do next.
 

The Hat

Printer VIP
Moderator
Joined
Jan 18, 2010
Messages
13,115
Reaction score
6,814
Points
433
Location
Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP3
Carry out the same procedure again, but this time when the print head moves, pull the power plug from the wall..

Not sure why you’d want to install carts when there’s a set already in.. ?:hu
 

Flageborg

Getting Fingers Dirty
Joined
Feb 10, 2021
Messages
61
Reaction score
8
Points
22
Printer Model
Epson R3000
Please post a picture
 
Top