Problem with Photo Cyan ink cartridge pulling through - Canon Pixma Pro 10s

Borut

Printer Guru
Joined
Oct 11, 2014
Messages
138
Reaction score
41
Points
142
Location
Slovenia
Printer Model
Canon Pro 10s
yes that is it!
Am low on english language so you need to take it on easy.

i see you have a pro 10 printer. when printing on glossy paper you ever notice straight lines in dark parts or light in the sky blue?
 
Last edited:

Artur5

Printer Master
Joined
Jan 24, 2011
Messages
1,294
Reaction score
1,618
Points
278
Location
Kmt. 0.
Printer Model
MB5150,Pro10s,i3Mk3s+,Voron2.4
No, I don't recall having such problems, but I usually print on luster/semigloss or even plain paper. The only glossy paper that I tried on the Pro10 is Canon Platinum (a few A4 sample sheets that came with the printer.)
If there had been weird lines, likely I'd noticed them, but I didn't. Of course, as it was right after receiving the printer, I still used the OEM set-up cartridges.
 

palombian

Printer Master
Joined
Feb 4, 2014
Messages
1,869
Reaction score
2,244
Points
297
Location
Belgium
Printer Model
PRO10,PRO9500II,MB5150,MG8250
So you see banding here also?This is like printers 20 y ago..But no banding on matt paper whit MBK ink.So is that CO fault?YES printing whit matt paper choice and color profile for glossy paper...no banding

Borut, can you post a larger scan with higher quality of the flower ?
Seems there is vertical banding over the whole print.

Also the print with the blue sky ?
The banding in this one is at the far right, so at the end of the printing job.
This is what I observe from time to time too, and probably caused by the paper transport and not by the ink.
 
Last edited:

Borut

Printer Guru
Joined
Oct 11, 2014
Messages
138
Reaction score
41
Points
142
Location
Slovenia
Printer Model
Canon Pro 10s
Here only in dark right corner up
q printing high
Did not jose say that is something in printer that measure this to not get lines and that we need that clean?
What is that to clean do you now?
 

Attachments

  • slika3 001.jpg
    slika3 001.jpg
    89.4 KB · Views: 416

palombian

Printer Master
Joined
Feb 4, 2014
Messages
1,869
Reaction score
2,244
Points
297
Location
Belgium
Printer Model
PRO10,PRO9500II,MB5150,MG8250
Here only in dark right corner up
q printing high
Did not jose say that is something in printer that measure this to not get lines and that we need that clean?
What is that to clean do you now?

It is a horizontal line over the whole print.
I suppose the print came out the printer bottom (bosom :)) first ?
Then it's what I see too, I think the paper transport slips at the end.
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Did not jose say that is something in printer that measure this to not get lines and that we need that clean?
What is that to clean do you now?
It might be best to ask Jose what Jose said.

He has not posted on the forum since 2018. You can try to contact him on this forum by posting your question to him by typing the "@" and then "Jtoolman" as one word, eg @Borut . If he comes to the forum he will be alerted that someone is posting to him. If he has email alert turned on, he would receive an email that you posted to him. Otherwise, you can try his YouTube channel or wherever he frequents to ask him about his advice.
 
Top