Printer Profile Validation: M1 vs. M2 and ΔE2000 Evaluation

[know]

Clarification:

My preliminary investigation suggests that NCM is misconfigured. Strip indicators, spacer color and size, and patch width and height do not appear to be contributing factors.

What do you mean by NCM? I might just be too inexperienced to know what you refer to...

Knut

 

[itsab1989]

I’ll definitely give it a try!

Meanwhile, I encountered difficulties measuring the 192-patch chart, as data from certain strips could not be captured. In contrast, the 576-patch chart was measured without any issues.

I randomized the patches, but it didn't really fix the issue.

View attachment 19390

Instrument: i1Pro 3
Printer: CP1500 4 × 6-inch dye-sublimation photo printer (Glossy)

Chart 192 Patches 10x15 cm
ArgyllCMS 576-patch target + 64 greys

Although I am not 100% sure maybe the issue is the very tight space between the patches and the other element on the sheet. The measurement should start and end on paper white so everything can be recognized correctly. So maybe it helps to turn off the colored strip and the markers.