Out With the Old Hotbed...

The Hat

Printer VIP
Moderator
Joined
Jan 18, 2010
Messages
12,711
Reaction score
6,372
Points
433
Location
Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP3


I only had this new CR-10s a short while before the hotbed had a bit of an accident !, while endeavouring to remove a finished print from it that was stuck, I damaged the laminate surface on the bed , so I decided to go with a new magnetic foam cover.

The other two printers had them and they worked well, and the hotbed was in need of something because it was becoming a pain in the arse trying to place my prints around the hotbed to avoid the Feckin hole…

In for a penny in for a pound..

P1010745.JPG P1010820.jpg Click to enlagre
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
7,080
Reaction score
5,208
Points
373
Location
USA
Printer Model
Canon MB5120, Pencil

The Hat

Printer VIP
Moderator
Joined
Jan 18, 2010
Messages
12,711
Reaction score
6,372
Points
433
Location
Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP3
Do you need to prepare the surface or coat it with something before printing?
Nope...That’s the beauty of this stuff, it’s good to go all the time..
I still like the glass on my other CR-10..
 
Top