costadinos
Printer Guru
- Joined
- Nov 16, 2012
- Messages
- 273
- Reaction score
- 98
- Points
- 111
- Location
- Cyprus
- Printer Model
- 7900, 4900, 9890, R2000, P50
Thought I should share some recent measurements I made;
I've been using OCP inks with the R2000, but the blacks and purples were rather weak, so I replaced these two colors with those from IS. Gamut and blacks on glossy media are now greatly improved, as you can see in the graphs below.
The combination still doesn't match the OEM inks of course, but it's definitely better than using either only OCP or only IS inks.
Paper used was Epson Premium Luster.
I've been using OCP inks with the R2000, but the blacks and purples were rather weak, so I replaced these two colors with those from IS. Gamut and blacks on glossy media are now greatly improved, as you can see in the graphs below.
The combination still doesn't match the OEM inks of course, but it's definitely better than using either only OCP or only IS inks.
Paper used was Epson Premium Luster.
