- Joined
- Jan 18, 2010
- Messages
- 15,915
- Reaction score
- 8,923
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
Now for a bit of good news…
I’ve managed to get my old CR-10 running again with a little bit of help from creality.com and a huge amount of encouragement and work from @Redbrickman.
I’ve even managed to squeeze it in beside my new CR-10 but more work is needed to get everything in a good working position, my first print was the power supply box (Switchable) to be screwed on to the wall, and now I’m printing brackets to secure the top of the printer to the wall, they’ll cut down on any vibrations on large prints.
click to enlarge..
I’ve had to sacrifice the KP-3’s position for the CR-10, but once I’ve got the CR-10 settled, I’ve relocated the KP-3 to a new working area then I’ll be fully stocked with 3D printers... I don’t fancy sleeping with Ted so I’ll have to be contented with 3 printers.. (Warning from the house management)
P.S. I have a short Video of them both working but its to big to load up here..!
I’ve managed to get my old CR-10 running again with a little bit of help from creality.com and a huge amount of encouragement and work from @Redbrickman.
I’ve even managed to squeeze it in beside my new CR-10 but more work is needed to get everything in a good working position, my first print was the power supply box (Switchable) to be screwed on to the wall, and now I’m printing brackets to secure the top of the printer to the wall, they’ll cut down on any vibrations on large prints.
click to enlarge..I’ve had to sacrifice the KP-3’s position for the CR-10, but once I’ve got the CR-10 settled, I’ve relocated the KP-3 to a new working area then I’ll be fully stocked with 3D printers... I don’t fancy sleeping with Ted so I’ll have to be contented with 3 printers.. (Warning from the house management)
P.S. I have a short Video of them both working but its to big to load up here..!
