iP4500

palombian

Printer Master
Joined
Feb 4, 2014
Messages
1,869
Reaction score
2,244
Points
297
Location
Belgium
Printer Model
PRO10,PRO9500II,MB5150,MG8250
Don’t worry I know where the battery is, so there will be no problem over that.. :thumbsup
I had something else in mind as open brain surgery with a dremel ;).
 

palombian

Printer Master
Joined
Feb 4, 2014
Messages
1,869
Reaction score
2,244
Points
297
Location
Belgium
Printer Model
PRO10,PRO9500II,MB5150,MG8250
As @The Hat experienced, older generation Canon dye printers must have been sturdy.

But I entered the scene too late (with the 525/526 carts) and had a lot of frustration.
Maybe cause of the German (Durchstich) refill method.
Also the refill inks faded while you were looking at them (but they were very cheap).

I still have 2 in stock (MG8250 and IX6500) but I better dump them in the recycling park as all the others (mostly MG5250's).
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
I think 54000 pages printed with one QY6-0067 print head is very impressive :)That printhead was considered fragile and the replacement type QY6-0075 less so.
I have cleaned out the auld printer and remover the head for the last time and the print head number was in fact the QY6-0067, so if Canon would just keep on making them like this one then we'd have a lot less problems.

But I have noticed the 5 cartridge heads tend to last longer than the 8 and 10 versions do, maybe the larger heads are put under more strain and have much the same electronics in them despite having more ink outlets to deal with.. Higher temperatures..
 
Last edited:

PeterBJ

Printer VIP
Platinum Printer Member
Joined
Nov 27, 2010
Messages
5,055
Reaction score
4,896
Points
373
Location
Copenhagen Denmark
Printer Model
Canon MP990
Today I decided to replace my iP4300 that suffers from cross contamination with an MP 800. Before changing the printers I did a nozzle check on the MP800 and sadly got this, click to enlarge:

MP800 2 PH kaput.jpg
This just shows that old canon printheads can fail suddenly without warning. A couple of days ago the printer was perfect. Luckily I have an MP980 with a reasonably good printhead and a CCD scanner. In spite of beginning blurring in BK it still prints good photos. I wonder how long that printer will last?
 

jimbo123

Printer Master
Platinum Printer Member
Joined
Dec 2, 2007
Messages
478
Reaction score
378
Points
223
Location
USA - NJ
Printer Model
MP830 MP980
PeterBJ

nice to hear that another MP980 still working. i have one that i use mainly for color printing, along w a stored MP980.

i use my MX870 for BW text printing, it used the same carts as the MP980. so it is fairly easy to swap ink carts back and forth since different carts are used. when carts get low i pull all 11 ink carts and refill/top them all off at once and put back in.

i remember years ago you sent me some parts for my MP830, they kept it going for over a year, so big thx.

J

------------------------------------------------------------------------------
• Active Printers: MX870, MP980, PRO-100
• Stored Printers: IP4500, MX700, MX860, MX870, MP980
• Past Printers: MP830
• Method: German Durchstich Method
• Ink: first Hobbicolors, then OCP, now ASPEN
• Misc: Squeeze bottles - so much easier than syringes
 

Latest posts

Top