How to remove PRO-1 printhead ?

[The Hat]

Just wondering if it's worth spending the £40 on inks or is the printhead dead ?? Thank you.

The only way to be certain is to get a set of OEM carts and run a deep cleaning cycle, then a nozzle check, if you have no improvement in the various colours then the print head is most likely fried, whatever you do Don’t print any test sheets until you get a perfect nozzle print.. if the head is damaged then the only other choice is the dumpster.. (Heads are Unavailable and non-repairable..)

P.S. The reason for buying OEM inks are because they are the best at cleaning out any nozzle clogs..

 

[kevinhughes1]

The only way to be certain is to get a set of OEM carts and run a deep cleaning cycle, then a nozzle check, if you have no improvement in the various colours then the print head is most likely fried, whatever you do Don’t print any test sheets until you get a perfect nozzle print.. if the head is damaged then the only other choice is the dumpster.. (Heads are Unavailable and non-repairable..)

P.S. The reason for buying OEM inks are because they are the best at cleaning out any nozzle clogs..

Thanks man it's just two inks I need so I'll order today

 

[The Hat]

it's just two inks I need so I'll order today

OK, but don’t run a system clean..

 

[kevinhughes1]

OK, but don’t run a system clean..

Just fitted the two new cartridges and ran the deep cleaning and one nozzle check here's the results please say its OK 😂

 

[kevinhughes1]

Just fitted the two new cartridges and ran the deep cleaning and one nozzle check here's the results please say its OK 😂

Just noticed pink in the co

 

[kevinhughes1]

Just noticed pink in the co

Scratch that ran another clean on the co and it's group and the pink has gone can't believe it's not been used for 2 possibly 3 years and still runs

 

[The Hat]

Scratch that ran another clean on the co and it's group and the pink has gone can't believe it's not been used for 2 possibly 3 years and still runs

Happy printing...

 

[kevinhughes1]

Happy printing...

Thanks man your a legend