W. Fisher
Printer Guru
- Joined
- Aug 13, 2015
- Messages
- 197
- Reaction score
- 99
- Points
- 143
- Printer Model
- Epsons, Canons, Brother.
Got a PK and M clog with the nozzle checks.
I did replace the carts prior and was wondering how one can tell if it is due to a possible air bubble or an outright clog?
Nozzle check shows the broken segments in the same areas of each color. Ran a few "Print Unclog Pattern" prints via Qimage Ultimate with the two colors with no improvement. However, the AutoClean off the printer's menu seems to help a bit more than using Qimage's unclogger too.
A flood of head cleaner on the two white pads on the capping station seemed to help with some - and letting it sit for a few hours.
Man these things clog easily!
W. Fisher
I did replace the carts prior and was wondering how one can tell if it is due to a possible air bubble or an outright clog?
Nozzle check shows the broken segments in the same areas of each color. Ran a few "Print Unclog Pattern" prints via Qimage Ultimate with the two colors with no improvement. However, the AutoClean off the printer's menu seems to help a bit more than using Qimage's unclogger too.
A flood of head cleaner on the two white pads on the capping station seemed to help with some - and letting it sit for a few hours.
Man these things clog easily!
W. Fisher