cli-521 problem or not

passenger

Getting Fingers Dirty
Joined
Jan 14, 2010
Messages
13
Reaction score
0
Points
22
Location
Croatia, Europe
I have an oem cyan cartridge, but without sticker that is originally on top...:rolleyes:

Can I refill this cartridge and apply in printer without any problems (leaking or poor ink flow)?
Or that sticker on top has it's own purpose considering that vent hole and air channel? Should I stick some duct tape on top?

Thank you
 

ghwellsjr

Printer Master
Platinum Printer Member
Joined
Jun 16, 2006
Messages
3,645
Reaction score
85
Points
233
Location
La Verne, California
Printer Model
Epson WP-4530
Yes, you should have tape covering the serpentine air path but leave an opening at the end. This path is important to keep the ink from drying out in the sponge compartment.
 

passenger

Getting Fingers Dirty
Joined
Jan 14, 2010
Messages
13
Reaction score
0
Points
22
Location
Croatia, Europe
5107_pic1.jpg


I should tape it like this black cartridge?
Electric tape should be fine?

Can you tell which is the vent hole, looking from right to left?
 

ghwellsjr

Printer Master
Platinum Printer Member
Joined
Jun 16, 2006
Messages
3,645
Reaction score
85
Points
233
Location
La Verne, California
Printer Model
Epson WP-4530
See this link for a complete discussion about the air vent.

The vent that goes down into the cartridge is the middle of the three circular depressions.
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,173
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
ghwellsjr said:
See this link for a complete discussion about the air vent.

The vent that goes down into the cartridge is the middle of the three circular depressions.
There appears to be 5 circular depressions on the top of the cartridge.
 
Top