I was having problems will waste full , finally got the pads cleaned and the code cleared. Now, another problem. I keep getting seven orange lights. according to canon's web site that indicates that you need to reset the print head. I took it out, cleaned the contacts, in and out, in and out. No dice, still the same error. Finally, I tried cleaning the head in hot tap water, then blew it down with some compressed air. Hey, it's nice and clean, but still get the same error. I don't know if this will end up in the trash heap, but it may end up embedded into my wall. Do you know what I should try next to reset this to get rid of the error?
I am unable to get any further that the flashing stage and am stuck. What exactly is going with this process and is their any way to remedy what ever the problem is?
Bob
I am unable to get any further that the flashing stage and am stuck. What exactly is going with this process and is their any way to remedy what ever the problem is?
Bob