Canon g2010 not printing red

Amit84

Print Lurker
Joined
Jul 24, 2022
Messages
2
Reaction score
0
Points
1
Printer Model
Canon g2010
Hi,
I am amit.
I am new to the group.
I am facing problem with my canon g2010.
While printing/photo copying color docs, red colours are replced with green and yellow.
After ink flush, its prints ok for few times. But the priblem restart after that.
What should i do?
 

Ink stained Fingers

Printer VIP
Platinum Printer Member
Joined
Dec 27, 2014
Messages
5,838
Reaction score
6,965
Points
363
Location
Germany
Printer Model
L805, WF2010, ET8550
how long do you have this printer - is there still a chance for warranty ?

Please post a nozzle check print when the problem occurs.

Do you have enough ink in the magenta tank ?

Do you see bubbles in the ink tubes going from the ink tanks to the printhead ?

What is your print overall print volume ?
 

Amit84

Print Lurker
Joined
Jul 24, 2022
Messages
2
Reaction score
0
Points
1
Printer Model
Canon g2010
1. Its more than 2 year old. Not is warranty
2.nozzle report attached. It not showing magenta.
3 ink tank snap attached. All having more than half ink.
4. Checked for bubble but not able to spot any.
5.print volume is very low. May be 2-3 in a week on average but sometimes i have printed 30 to 40 pages in a single go.
 

Attachments

  • 20220725_102841.jpg
    20220725_102841.jpg
    37.6 KB · Views: 109
  • 20220725_102933.jpg
    20220725_102933.jpg
    60.5 KB · Views: 106
  • 20220725_103050.jpg
    20220725_103050.jpg
    52.7 KB · Views: 135

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
While printing/photo copying color docs, red colours are replced with green and yellow.
After ink flush, its prints ok for few times. But the priblem restart after that.
When you have an problem with one or more of your colours while doing a couple of prints, it’s very important to stop all printing activity immediately and output a nozzle print check to see what is causing the issue.

Now that you have posted a nozzle check here, it is clear that the magenta nozzles are burned out and damaged, and you’re going to need a new print head to continue.. Sorry.
 
Top