rounakr94
Getting Fingers Dirty
- Joined
- Mar 7, 2022
- Messages
- 60
- Reaction score
- 20
- Points
- 45
- Printer Model
- Canon Pixma E510, Pixma G2010
I have a Canon G2010 from 2022 and currently it is suffering from a door sensor issue. The door sensor seems to have come loose or faulty and when any button is pressed on the body it seems to trigger the Top Door open message. I have seen some videos where they just short the sensor and make it a direct connection and other where they use a sort of shim to make the top body plunger a bit taller so it presses more tightly (Like I did in image 2).
I used a foam double side tape to make a soft shim, is it safe to use it like that or will that cause any issues? Canon is quoting a large amount for the sensor change plus it will take a month or so for the sensor to arrive.
I used a foam double side tape to make a soft shim, is it safe to use it like that or will that cause any issues? Canon is quoting a large amount for the sensor change plus it will take a month or so for the sensor to arrive.
