Search results

Hi again @pharmacist i would like to have also a target patches for a single 10x15cm sheet (i suppose it will be around 120/140 patches) i know it can't be used for generating a true ICC profile, but i will use it to test an unknown (or not defined) paper with different media (paper) type, just...

Ok now i understand your point, intensive clean and flush of the channel without considering the clog possibility between the cartridge change let me decide to use only the 106 dye black, i was supposing wrong thanks for your findings and hints

My question was about the 105 ink, because it is pigment ink, that would give a better black on Matte Papers. The XP 15000 has the head on each cartridge so on each colors if i'm right (correct me if i'm wrong) If it's so, i could have a Black Cartridge with Pigment ink to use when i need to...

I printed the A4 target patch on Normal Paper using A4 Bordless option but Expansion minimal and it is printed perfectly on A4 using all the space i tried to print the target with Colorsync Utility (using Color: Print as target option) and using Adobe Color Print Utility (that use Colorsync...

I know this post is old, but i have some questions for you, i have a lot of 105 Black (I suppose it is Pigment Black) that i got buying old set of 105/106 inks for my Epson XP 15000, i have about 1 LT of it now the questions are: Can i use this Black on my Epson XP 15000 replacing the...

Thanks so much, i will have to work a lot, i'm hoping the iprofiler v3.1.1 i got will work (fingers crossed)

Thanks @pharmacist for the files. now an easier question, is not possibile to make a profile with only one sheet of A4 ? I ask this because i see in the TIF files, enough white space left over/under and left/right of the 17 rows and 25 columns, maybe the problem is the ruler length ? If you...

hi @pharmacist i'm approccing to use this method, maybe i got a v3.1.1 of iprofiler per Mac OSX that would work with my i1pro (i have 2 of them), so i would like to know if you have some target patches profile optimized for the i1pro on a single A4 sheet, you talk about a TC9.18 but i don't...

This is mine :) If you want to fix the hole, use that of the little one ruler (you have the link to download it) it has a bigger hole. the problem with the ruler is that can be used for horizontal scanning, if you want to use it for vertical scanning, you need to make it longer and you need a...

Ok i will reprint the target again, then i will read them again, i updated ArgyllCMS to the latest version, maybe i would have left it to the old version :)

could it a low patches profile that gives these results ?

Thanks for the info. Can you compare my icc profiles and give some feedback ?

Hi all, i got about 750+ sheets of A3+ old paper for 70 euros, it goes from Canvas, Fine Art, Glossy, Semigloss, Photo Quality, Matte, from Canson, Ilford, Epson, Canon, HP and other unknown brands. For some of them i got the paper manufacter profiles for my Epson XP 15000 (but i think maybe i...

yep i will use the suggested trick by Ink stained Fingers, to use a sheet of 100 patches printed with several Epson paper like media type (Premium Glossy, Matte, Semigloss) and if i have enough lucky on the same A4 sheet, then compare the profiles to see which one have the darkest black, when i...

Yes, usually i leave it dry for 24 hours, then read the sheet of patches to make the profile

thanks i had read that article, but my question was more general, is it better use a conditional Epson profile, to create a new set of patches or is it better use a set of patches from zero ? Another question i have a Ferrania Optijet Matte High Resolution Paper 120gsm and I created a profile...

Thanks i used the trick to wet two fingers and then keep tight the paper on an angle with them, wait 2 seconds and then try to open the fingers, only one of them will keep the paper from going to the floor, that will be the right side where to print on

I use Argylcms and the i1pro to make profiles. My question is - Using a precondition ICC with ArgyllCms (using for example the ICC for the Epson Premium Glossy Paper if the paper is a glossy paper) and generating a new set of patches based on that ICC will give better results then -...

Hi all, i know it seems a stupid question, but i got a stock of A3 and A3+ (600 sheets for 70 euros) of photographic paper, Olmec, Canson, HP, Epson, some Matte, Cotton, Canvas without name, and so on. My printer is an Epson XP 15.000 and for all the paper i could download a profile i did it...

Strange my Epson XP 15000 Horizontal alignment page is in cyan (like your first page) I don't have a second page like your second image, i have only 7 patterns and it is not so easy understand the best one, you have to pay attention to the pattern, the bars are all closed together, some less...