Search results

Case update. During normal printing (plain paper, non OEM ink) magenta stops (cartridge NOT empty). Cleaning cycle, cleaning with formula ( 2 times 12 h) and then cleaning cycle. Nozzle check after cleaning. One more cleaning cycle (spots in magenta). Nozzle check after cleaning. Next...

Which situation do you want? 1. check or 2. check or?

Hard to say. I bought this https://www.nordic-ink.dk/rensevske-canon-printerhoveder-p-799.html?osCsid=d3vgbfudkk7kg395fr3agqjen3 They do also sell printheads for IP7250

I've now tried a bought cleaner for printhead with poor result. My printer (IP7250) keeps missing magenta in the print. After a deep clean the nozzle check showns magenta with one or two short lines. In the next nozzle check magenta is missing 100%. Can anyone think of a reason? Presently I...

I experience a IP7250 which is clogging magenta roughly three (3) A4 prints after heavy cleaning with cold tap water and deep cleaning. First nozzle check looks fine. Second check shows various lines in magenta. Control print of A4 picture shows no magenta. I'm using non OEM (3rd party) ink. My...

Thank you for all the answers. I think I understand most of the problems and look for solutions to reduce the cost/work of this: Task: Printing approx. 200 pages A4 (8"x10") plain paper a week. Using high quality setting (to avoid lines) on a Canon IP7250. (roughly 125 pages/cartridge). Wish...

Can I mix bulk yellow and magenta dye ink from the same manufacturer? I want to have the original color (see #62) of yellow. I can reach allmost the right result by changing the color-setting in the printerdriver, but it would be easier to change the ink before refilling. (I know I've to do...

I've tried to order one kit. So now I just have to wait.

Does anyone know a supplier for Canon spare parts who can supply in EU without ekstra customs (after Brexit)? At the monent I'm looking for a waste ink absorber kit QY5-0384.

Have anyone tried to drain the absorber by drilling a hole in right hand front bottom corner and place the printer on a 'safety tray'? Can such a solution be bought? (You have to reset etc...)

Having tested both genuine and claimed resetable cartridges on a Canon Ts705 using x81 type cartridge I can confirm that none are resetable. Both are behaving the same way (inklevel have to be disabled for continuos use)! Accepting to run without inklevel detection I need a yelow ink more like...

Please tell: What is '251', '271' and '281'?

The translation is correct. I did not do anything, but continued printing. No button presset. There seems to be two ways of printing either by app or by windows systemdialog print routine (Ctrl+shift+P). If I print from Edge (browser) I'll be using the app unless I select systemdialog print...

Just to clarify Above is the normal picture of any cartridge which has not been empty (genuine, used or just filled). When exchanging a not full (used or refilled) cartridge then printer shows a rolling text: '<Y> De viste blev registreret som brugte ægte canon-blækbeholdere' 'Tryk[ok]'. If...

I do not want to argue, but want to be precise. Stratman, pls read to last part of your post, below the highligted (Nevertheless...). My doing: First I filled the cartridge (took some time from new empty). Insert in printer. Ink level indicated. Run empty. Red cross, low level shown. Refilled...

I've now tested a refillable cartridge from led-lampe24.de indicated as 'auto reset'. These cartridges for cli-581 are NOT 'auto reset'. They are not even resetable! Test was done with a yellow cartridge on a TS705. When empty the printer is indicating that the refilled cartridge is a reused...

Anyone knowing where or how to find a circuit diagram for canon ts9150 in order to being able to read and write to a cartridge chip?

Thank you for all the answers. As I read, the QC5806 chip is unknown. Pls allow a question: When/if I get a ink level 'switch off'/'disable' signal, will I later be able to reenable ink level checking or is this 'disable' allso a 'one time' item?

That is why I'm confused. At pkt. 1 you say 'Stored' At pkt. 3 you say 'modified' Question: How is the printer modifying/storing data (in the chip)?

Sorry - I know I'm very confused. Simple cli-581only questions: - What data is saying 'cartridge not filled, first time' and how does the printer know? - How does the printer know (and remembers) that this cartridge have once before been filled and emptied (for the rest of the cartridge...