Recent content by PSJim

Good idea about the ink use. I will try this Thank you.

Since I changed to USB instead of network the information on status monitor is proper. I ran nozzle check 5 were bad. I ran the clean and nothing changed. I replaced 5 cartridges and ran nozzle check and improve on 2 colors. Ran clean and nozzle check with absolutely no change with any colors...

If you use the ink button on printer, you can open the ink area and it a light that tells you what is empty. I have reinstalled printer as usb to my computer for the first time. It has always been wireless. Now the status monitor works. I don't know why, but thanks, I will try your other...

I have now run nozzle check and have run cleaned and showed one is empty. Replaced and trying again. It showed another empty. This has called for 5 new cartridges. I replaced each 5 and when nozzle check is run there is no change, even after using clean process. Does this mean printhead clogs...

I probably asked for things improperly. The only problem is that it will not show the level on the cartridges. This means that I have no idea of what to purchase or what to change when a clog shows on one color and If I knew that color almost empty, I would replace that, etc. Sometimes running...

I have always used Epson original cartridges. I have printed for awhile with this problem of status monitor. When the printer stopped, I assume it was because of an empty cartridge. It would be very expense to replace all ink and have the problem again. I do not know of any other problems with...

The R2000 now does not show "amount" of ink left on any cartridge. Therefore I do not know what to replace when printer when is stopped. I have reinstalled with no change and Epson doesn't care.