Recent content by mavtop

Ok i was thinking it was a shift on the Red color of the generated profile

Hi @pharmacist in this last print, i see a stronger Red respect all the other previously printed test images I don't know if it's the paper (Satin more saturated ?) /printer/ink combination or what

Thanks a lot @pharmacist i hope to have some time to try them all

just to know can i use the SpiderPrint target for the iProfiler that you built i seen in other post ?

i printed it, i will wait tomorrow to try to scan

ok thanks for the new ruler but i will need to fix my 3d printer before i mean not in the long side, but in the sort side, anyway my ruler is 21,2 cm in the long and 6mm in the short side

the problem can be the printer region, because with US printers for sure it doesn't work, when you reset the original cartridges they will lose the Epson "originality" so the printer will recognize them like compatible and with US firmwares you can't use them, but with european firmwares you can.

the big window is 20cm large (why so short if i enlarged your project ?), so i suppose is this the problem. the sensor window is 21,2cm large but for now i can't reprint the 3d model, my printer is off we need to fix it if you see the image, instead i can't reach the left and right white...

@pharmacist today i tried to use your enlarged ruler (we used a value to increase the length) to scan using i1profiler v3.1.1 for Mac with my i1pro (EFI-1000) but with no success, I could read 24/25 patches versus 27 of each line, the ruler is not long enough to permit the read of all the...

if i remember good @pharmacist had troubles after 3/4 refill with the aliexpress cartridge, use the original, i already refilled them 5 times with no problem, the Chinese sponge is not so good like the Epson one

the Epson 378 cartridge are Claria HD and the Epson 106 bottles are a good replacement like @Ink stained Fingers fade tests show Using the 106 bottles you have all the main colors and can mix the main colors to get the light versions, i suspect that someone can help you dosing the colors. but...

that i mean @Ink stained Fingers is, seeing the original posted Evaluation Images from @pharmacist we can see that original Red (the upper image) is a little stronger of the Mixed Red (the lower image) maybe a bit of Black or more Magenta will give a stronger Red ? anyway after profiling we will...

I was thinking that maybe we can add 1/2/3 part of Cyan or less to the Magenta/Yellow mix to add more punch to the Red, @pharmacist did you try to add Cyan to your mix ? EDIT: hmm from color theory RED is created from Magenta + Yellow, than to have it lighter we can add White, to have it darker...

I will use the 80 parts of magenta and 20 parts of yellow to get the Red for the grey i wll use the Epson 114 grey bottle, it is already ready to use I have different syringue for different color, so i have one for CMYB I got 6 bottles so i can fill them with each color CMYB plus Red and...

Thank you very much @pharmacist i will have a lot to test in Christmas time: - some ancient HP Baryte Satin Art Paper (it tells for pigment inks, but i will try with dye) i have in A3+, 610mmx30m rolls and 1118mmx15,2m rolls - some old A3+ Arches Textured Cotton paper (i suppose it is Hahnemuhle...