TonyH
Newbie to Printing
- Joined
- May 21, 2023
- Messages
- 3
- Reaction score
- 4
- Points
- 3
- Printer Model
- Epson L355
Hi I have an l355 and just cleaned the heads , while I was screwing in the plastic cover on the feed tubes I dropped the holding screw down into the printer ,
spent hours trying to retrieve the screw to no avail ,
The screw dropped in the far right just next to where the print head rests ,
Should I disassemble (if I can) or just take a chance and hope the screw is somewhere that it won't do damage ,
My only other option is to buy a new one and to be honest I have it about five years so it won't be the end of the world , any thoughts on what ye would do ?
spent hours trying to retrieve the screw to no avail ,
The screw dropped in the far right just next to where the print head rests ,
Should I disassemble (if I can) or just take a chance and hope the screw is somewhere that it won't do damage ,
My only other option is to buy a new one and to be honest I have it about five years so it won't be the end of the world , any thoughts on what ye would do ?