How to remove PRO-1 printhead ?

Flageborg

Getting Fingers Dirty
Joined
Feb 10, 2021
Messages
86
Reaction score
14
Points
35
Printer Model
Epson R3000
12 hours gravity resting and new Nozzle Check.....but still preparing the syringes to draw some "blood" before final cut... 💉

Only 800 pages and reaching End of Life makes me sad...
 

Attachments

  • pro1_nozzle_150221_II.jpg
    pro1_nozzle_150221_II.jpg
    50.3 KB · Views: 181

malantheon

Getting Fingers Dirty
Joined
Jan 15, 2021
Messages
24
Reaction score
26
Points
38
Printer Model
Canon Pro 1
Shout out to @Martin_1979
I am also a Pro-1 user from Slovakia, Bratislava. And I know some other people using Pro-1 here, too.

Anyway, I would never-ever put non-OEM cartridge inside the Pro-1 printer. They are significantly different in their built-quality, and they WILL kill your printer. Much safer route is to buy compatible ink (and chips) from a source with a good reputation and re-fill the original cartridges with this ink. That being said, with shipping, taxes, and import, the cost ends up to be not that very much different from OEM inks if you can buy them cheaply and possibly tax-free.

Anyway, if you need to get rid of some OEM cartridges because your printer is dead, I am all ears, send me a PM.
 

malantheon

Getting Fingers Dirty
Joined
Jan 15, 2021
Messages
24
Reaction score
26
Points
38
Printer Model
Canon Pro 1
Is there any market for complete and empty set of PRO-1 original cartridges ?
AFAIK Octoink gives discount on their inks if you send your OEM carts in. Shipping them to Jose Rodriguez would make him happy just as well, although I don't know if he still buys them in - the market is dwindling. He used to sell modified carts that accept the 3rd party one-time chips.
There is still a market for selling modified OEMs and those sellers are for sure in need to get it somewhere from.
 

Flageborg

Getting Fingers Dirty
Joined
Feb 10, 2021
Messages
86
Reaction score
14
Points
35
Printer Model
Epson R3000
Jose just hates the PRO-1.... ;)
everybody hates PRO-1....me too
 
Last edited:

malantheon

Getting Fingers Dirty
Joined
Jan 15, 2021
Messages
24
Reaction score
26
Points
38
Printer Model
Canon Pro 1
Jose just hates the PRO-1.... ;)
everybody hates PRO-1....me too
Jose just got a second piece last week, so he might be changing his opinion (or not). While he hates this very expensive girlfriend, he is still willing to get his hands dirty with her... old love never rusts!
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,617
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Only 800 pages and reaching End of Life makes me sad...
This printer was run without due care or attention to the nozzle check, when there is an issue with a few clogs then a normal head clean usually solves the problem and normal printing can resume without causing any damage to the nozzles..
, I would never-ever put non-OEM cartridge inside the Pro-1 printer. They are significantly different in their built-quality, and they WILL kill your printer.
No that’s not correct, non OEM’s can work just as well, but like everything else you buy, there are very poor ink tanks out there too, and there might not be pigment ink them either, only dye, buy cheap, pay twice.
I don't know if he still buys them in - the market is dwindling. He used to sell modified carts that accept the 3rd party one-time chips.
Jose Rodriguez does not buy Pro 1 ink tank, he use to get his spares free from a reliable source (Not anymore) and you can modify your cart yourself, but you’ll also have to purchase 1 time chips from AliExpress, so it’s not all straight forwards.
everybody hates PRO-1....me too
Lots of owners hate the Pro 1 simply because they don’t understand that it’s a professional photo printer and not a play thing, it fills that roll very well..
While he hates this very expensive girlfriend
It’s only expensive if you can’t afford to run it on OEM inks..
AFAIK Octoink gives discount on their inks
Now because of Brexit that avenue may be more expensive to get your supplies from , and you won’t know till you purchase something, beside octopus-office.de/shop/ is still a good place for all supplies..


 

Flageborg

Getting Fingers Dirty
Joined
Feb 10, 2021
Messages
86
Reaction score
14
Points
35
Printer Model
Epson R3000
This printer was run without due care or attention to the nozzle check...
Absolutely......and the paper jammed under the printhead......???
Transferring ink from the now obsolite PRO-1 is to be continued...... 💉
 

Attachments

  • blood_transfer.JPG
    blood_transfer.JPG
    113.6 KB · Views: 169

malantheon

Getting Fingers Dirty
Joined
Jan 15, 2021
Messages
24
Reaction score
26
Points
38
Printer Model
Canon Pro 1
Quite contrary, as of yet I love my Pro-1. Also, thanks to it I will never start smoking, never start drinking and never ever touch gambling. Everytime I buy a cartdridge, I say this is my cigarette money, this is for all the beer I did not drink last month, etc. :)
I am only afraid that once the maintenace pads are full, it will be the end of the road :-(
 
Top