3D Print Project - 2 Gang Wall Plate With Blank

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
So, I'm in the process of installing a WIFI wall switch like this:

https://amzn.to/2JmSEFu

That will allow me to put my hall and porch lights on a timer, dusk/dawn, and just control them from anywhere anytime.

I have a 2-Gang box and I'm thinking about combining the two switches (porch and hall lights) into one switch since I always control them together.

That would require a new wall plate cover.

I could buy this one on Amazon for $8 https://amzn.to/2Jl8ikR

... or print one! :D

I used this incredibly awesome customizable wall-plate designer: https://www.thingiverse.com/thing:47956

... and printed my customized thing!

upload_2018-6-1_16-32-17.png


You can see it took 1:40. I probably should have done more top/bottom layers and also gone slower... but as @The Hat knows, I'm terribly impatient!

The final cover was 19 grams, and with my ZylTech filament at $12 a KG, that's a plastic cost of $0.23

upload_2018-6-1_16-33-23.png


I'll post pics of it installed when (hopefully not if) my new switch arrives and I have it installed and tested!
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,623
Reaction score
8,695
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
I don’t do Wi-Fi, it’s my pet hate, I hot wire everything, because it’s very annoying to have to do the same thing several times just to be sure it works, and all my outside lights (7) are on Photoelectrical cell switch, with 3-watt LED lighting...
P.S. The Friggin dog is afraid in the dark...:hide
 

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
LOL!

I'm actually LOVING my wi-fi life!!! I purchased a Wi-Fi enabled thermostat and set it up to work with my Google Home Mini. It's GLORIOUS in the winter to lay in my warm bed and say, "Hey Gooogle, set the temperature to 72 degrees".

That was such a great experience, I purchased a WIFI sprinkler controller timer. It auto-adjusts to temperature and rain, so my lawn isn't watering when it's raining. It's also SUPER easy to setup.

Last night I put a lamp on one of these wifi outlets, and it was a lot of fun controlling it with my voice, putting it on a timer, etc!
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,623
Reaction score
8,695
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Last night I put a lamp on one of these wifi outlets, and it was a lot of fun controlling it with my voice, putting it on a timer, etc!
Gee’s maybe thats where I’d going wrong, I need a Friggin Wi-Fi voice-controlled Dog...
The kick in the bum only works when you can catch him...:weee
I was thinking of getting an automatic lawn cutter, but I couldn’t catch the Feckin goat either... :eek:
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,172
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
I was thinking of getting an automatic lawn cutter, but I couldn’t catch the Feckin goat either...
Goats for lawn cutting are like Roomba's for vacuuming - you let them go and they eventually get it done.
 

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
I LOVE being able to set my thermostat from anywhere. There were days where I was coming home and knew the house would be cold, so I'd just say to my phone (while about 20 minutes away) "Set the thermostat to 71" and I'd have a nice warm house when I arrived.

I've now got my wifi switch installed.

I also reprinted the wall plate. I edited out the non-used holes (in tinkercad) and printed it with thicker walls & top/bottom, and printed it slower so the quality would be better than the first.

Here's the final outcome:
wall-plate.jpg


... and the before:
wall-plate-before.jpg
 

Emulator

Printer Master
Platinum Printer Member
Joined
Jan 4, 2012
Messages
1,675
Reaction score
1,308
Points
277
Location
UK
Printer Model
Canon Pro9000 II
These voice controlled things; is there a possibility that someone is remotely able to listen to everything that occurs, or is said, in the house? Amazon for example.
 

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
These voice controlled things; is there a possibility that someone is remotely able to listen to everything that occurs, or is said, in the house? Amazon for example.

I know there's a lot of discussion about Google Home, Alexa, etc. "always listening", but I don't really worry about it. I mean, there are tradeoffs / risks we take with everything we do. Heck, even my neighbor won't sign up for a grocery club-card because he doesn't want "the man" tracking his grocery shopping.

Honestly, if people really wanted to cause me (or anybody) problems / hack into our lives, this is the kind of stuff to worry about: https://www.youtube.com/watch?v=lc7scxvKQOo
 
Top